-
Forum
-
Equipment
-
Filters, Heaters, Lights
-
hagen glo ballast help needed
×
Hi,
John Howell who has managed the forum for years is getting on and wishes to retire from the role of managing it.
Over the years, he has managed the forum through good days and bad days and he has always been fair.
He has managed to bring his passion for fish keeping to the forum and keep it going for so long.
I wish to thank John for his hard work in keeping the forum going.
With John wishing to "retire" from the role of managing the forum and the forum receiving very little traffic, I think we must agree that forum has come to a natural conclusion and it's time to put it to rest.
I am proposing that the forum be made read-only from March 2022 onwards and that no new users or content be created. The website is still registered for several more years, so the content will still be accessible but no new topics or replies will be allowed.
If there is interest from the ITFS or other fish keeping clubs, we may redirect traffic to them or to a Facebook group but will not actively manage it.
I'd like to thank everyone over the years who helped with forum, posted a reply, started a new topic, ask a question and helped a newbie in fish keeping. And thank you to the sponsors who helped us along the away. Hopefully it made the hobby stronger.
I'd especially like to thank John Howell and Valerie Rousseau for all of their contributions, without them the forum would have never been has successful.
Thank you
Darragh Sherwin
hagen glo ballast help needed
Less
More
-
Posts: 1090
-
Thank you received: 45
-
-
23 Dec 2011 23:06 #1
by fishmad1234 (Craig Coyle)
Right lads this problem is doing my head in.
Have a hagen glo ballast unit have bulbs 39 w so took tanks out of rack secured the light fitting s in place put caps on bulbs turn on unit hey presto great beams of light come out stay on for about 25 seconds and go off turn light unit off for a minute then turn it back on lights come on again then 20 seconds later lights go off have ada ready to put in my tanks and fill up but this light problem is absolutely doing my brain in
any one any ideas
craig
at the end of the day it becomes nite
Please Log in to join the conversation.
Less
More
-
Posts: 1090
-
Thank you received: 45
-
-
24 Dec 2011 00:19 #2
by fishmad1234 (Craig Coyle)
Think i have managed to solve problem the box of.the light unit says 2x24 w so if im trying to run 2 x39 w bulbs on a unit that is only ment for 24 w would this cause it to short
craig
at the end of the day it becomes nite
Please Log in to join the conversation.
-
stretnik (stretnik)
-
-
Visitor
-
24 Dec 2011 00:20 #3
by stretnik (stretnik)
Spot on Craig, it's a fail safe to protect the Ballast, it is a 2 x 24 watt unit.
Kev.
Please Log in to join the conversation.
Less
More
-
Posts: 1090
-
Thank you received: 45
-
-
24 Dec 2011 00:35 #4
by fishmad1234 (Craig Coyle)
Thanks kev god i was going off my nut tank was lighting up great for the hole 20 seconds it was on silly me
hope the 24 w bulbs look as good as the 39w s did screwed the unit onto the side of the rack and looks nice and neat try get some different bulbs hope fully before every where closes
craig
at the end of the day it becomes nite
Please Log in to join the conversation.
-
stretnik (stretnik)
-
-
Visitor
-
24 Dec 2011 00:39 #5
by stretnik (stretnik)
No worries, I knew about this because I did the exact same thing with the clearseal, drove me batty until I read the box, duh!!
Kev.
Please Log in to join the conversation.
Less
More
-
Posts: 1090
-
Thank you received: 45
-
-
24 Dec 2011 00:46 #6
by fishmad1234 (Craig Coyle)
Yeah thats how i cop ed on to it just read the box and DING just realised it.
Did you get a bigger wattage unit for the clearseal tank.
Craig
at the end of the day it becomes nite
Please Log in to join the conversation.
Less
More
-
Posts: 98
-
Thank you received: 25
-
-
-
Forum
-
Equipment
-
Filters, Heaters, Lights
-
hagen glo ballast help needed
Time to create page: 0.044 seconds