-
Forum
-
Equipment
-
Filters, Heaters, Lights
-
sump question
×
Hi,
John Howell who has managed the forum for years is getting on and wishes to retire from the role of managing it.
Over the years, he has managed the forum through good days and bad days and he has always been fair.
He has managed to bring his passion for fish keeping to the forum and keep it going for so long.
I wish to thank John for his hard work in keeping the forum going.
With John wishing to "retire" from the role of managing the forum and the forum receiving very little traffic, I think we must agree that forum has come to a natural conclusion and it's time to put it to rest.
I am proposing that the forum be made read-only from March 2022 onwards and that no new users or content be created. The website is still registered for several more years, so the content will still be accessible but no new topics or replies will be allowed.
If there is interest from the ITFS or other fish keeping clubs, we may redirect traffic to them or to a Facebook group but will not actively manage it.
I'd like to thank everyone over the years who helped with forum, posted a reply, started a new topic, ask a question and helped a newbie in fish keeping. And thank you to the sponsors who helped us along the away. Hopefully it made the hobby stronger.
I'd especially like to thank John Howell and Valerie Rousseau for all of their contributions, without them the forum would have never been has successful.
Thank you
Darragh Sherwin
sump question
Less
More
-
Posts: 1539
-
Thank you received: 17
-
-
22 May 2010 13:18 - 22 May 2010 14:55 #1
by dar (darren curry)
ok i'm still in two minds as to build one, i dont need one yet but it's definitly in the pipeline, so question 1 do you think the inner devides in the cabinet are load bearing?. also i know some can be loud (i have a spray bar that i can hear from outside the house and it doesn't bother me but the missus cant stand the tank let alone the noise) so question 2 do you think if i sound proof the cabinet it will interfere wit the oxygenation of the water as this will be my only source due for the need of the outflow being submerged. cheers Darren
Check out the angling section, it is fantastic
Please Log in to join the conversation.
Less
More
-
Posts: 347
-
Thank you received: 10
-
-
Less
More
-
Posts: 1539
-
Thank you received: 17
-
-
22 May 2010 16:52 - 22 May 2010 16:53 #3
by dar (darren curry)
ive none at the mo but i can arrange drilling, does the rule the more the merrier apply to over flows
Check out the angling section, it is fantastic
Please Log in to join the conversation.
Less
More
-
Posts: 347
-
Thank you received: 10
-
-
22 May 2010 17:38 #4
by Puddlefish (Colin McCourt)
From a marine standpoint and I suppose it accounts for freshies as well it's best to have 2 drilled overflows behind a weir. One can be noisy and hard to control. The air being pulled down the tube by the water will sound like a toilet.
One long tube and a shorter tube both coupled to gate-valves under the tank. the long tube gate valve is always fully open whereas the shorter tube gate-valve is regulated to baffle the sound. Once set you can forget about it.
Then you have the return.
Regards
C
Please Log in to join the conversation.
Less
More
-
Posts: 1539
-
Thank you received: 17
-
-
22 May 2010 17:49 #5
by dar (darren curry)
hmmm education is a marvelous thing, wat would the best diameter of the pipe work, i'd assume one either side so would it be best to keep the controlled overflow on the side of the return flow
Check out the angling section, it is fantastic
Please Log in to join the conversation.
Less
More
-
Posts: 347
-
Thank you received: 10
-
-
22 May 2010 18:02 #6
by Puddlefish (Colin McCourt)
No idea Darren, I suppose it's down to asthetics on that one.
Here is my config. 40mm overflows 25mm return. Tank size 4'x2'x2'
Regards
C
Please Log in to join the conversation.
-
Forum
-
Equipment
-
Filters, Heaters, Lights
-
sump question
Time to create page: 0.041 seconds