×
Retirement and forum shutdown (17 Jan 2022)

Hi,

John Howell who has managed the forum for years is getting on and wishes to retire from the role of managing it.
Over the years, he has managed the forum through good days and bad days and he has always been fair.
He has managed to bring his passion for fish keeping to the forum and keep it going for so long.

I wish to thank John for his hard work in keeping the forum going.

With John wishing to "retire" from the role of managing the forum and the forum receiving very little traffic, I think we must agree that forum has come to a natural conclusion and it's time to put it to rest.

I am proposing that the forum be made read-only from March 2022 onwards and that no new users or content be created. The website is still registered for several more years, so the content will still be accessible but no new topics or replies will be allowed.

If there is interest from the ITFS or other fish keeping clubs, we may redirect traffic to them or to a Facebook group but will not actively manage it.

I'd like to thank everyone over the years who helped with forum, posted a reply, started a new topic, ask a question and helped a newbie in fish keeping. And thank you to the sponsors who helped us along the away. Hopefully it made the hobby stronger.

I'd especially like to thank John Howell and Valerie Rousseau for all of their contributions, without them the forum would have never been has successful.

Thank you
Darragh Sherwin

Co2

More
31 Mar 2009 17:21 #1 by russell (russell watson)
Co2 was created by russell (russell watson)
Hi All
Is anyone using the Techno Co2 Reg as there dosn't seem to be a pressure reg on it ???????????

Please Log in to join the conversation.

More
31 Mar 2009 17:50 #2 by russell (russell watson)
Replied by russell (russell watson) on topic Re:Co2
Now I see it!!! It's a case of buyer beware as I have to buy a Reg valve to fit between the fire extinguisher and the dual guage reg!!!If I conect the unit directly to the F/E it would blow the reg espaecialy the low pressure sideas soon as I opened the handle!!!!!!!!!!!!!!

Please Log in to join the conversation.

More
31 Mar 2009 22:00 #3 by duzzy1 (Martin Kennedy)
Replied by duzzy1 (Martin Kennedy) on topic Re:Co2
is it a fire extinguisher you are using for your co2 supply ??

Please Log in to join the conversation.

More
01 Apr 2009 14:16 #4 by russell (russell watson)
Replied by russell (russell watson) on topic Re:Co2
It's ok I found a conversion table and the Reg Runs At 196 bar inlet outlert and 1.961 bar

Please Log in to join the conversation.

More
01 Apr 2009 21:02 #5 by duzzy1 (Martin Kennedy)
Replied by duzzy1 (Martin Kennedy) on topic Re:Co2
have the same set up myself and got myself a reg on ebay ....

since i hooked it up its working a treat

Please Log in to join the conversation.

More
01 Apr 2009 21:09 #6 by duzzy1 (Martin Kennedy)
Replied by duzzy1 (Martin Kennedy) on topic Re:Co2
take a look at this thread to see the one i got

www.irishfishkeepers.com/cms/component/o...w/catid,41/id,43608/

Please Log in to join the conversation.

Time to create page: 0.039 seconds
Powered by Kunena Forum