×
Retirement and forum shutdown (17 Jan 2022)

Hi,

John Howell who has managed the forum for years is getting on and wishes to retire from the role of managing it.
Over the years, he has managed the forum through good days and bad days and he has always been fair.
He has managed to bring his passion for fish keeping to the forum and keep it going for so long.

I wish to thank John for his hard work in keeping the forum going.

With John wishing to "retire" from the role of managing the forum and the forum receiving very little traffic, I think we must agree that forum has come to a natural conclusion and it's time to put it to rest.

I am proposing that the forum be made read-only from March 2022 onwards and that no new users or content be created. The website is still registered for several more years, so the content will still be accessible but no new topics or replies will be allowed.

If there is interest from the ITFS or other fish keeping clubs, we may redirect traffic to them or to a Facebook group but will not actively manage it.

I'd like to thank everyone over the years who helped with forum, posted a reply, started a new topic, ask a question and helped a newbie in fish keeping. And thank you to the sponsors who helped us along the away. Hopefully it made the hobby stronger.

I'd especially like to thank John Howell and Valerie Rousseau for all of their contributions, without them the forum would have never been has successful.

Thank you
Darragh Sherwin

pump for water container(wheelie bin)

More
21 Feb 2010 10:33 #1 by Damian_Ireland (Damian_Ireland)
I am looking at getting a pump for my wheelie bin for my water changes. I have seen these 2 in B&Q , can someone tell me which one i should be buying and why ?
www.diy.com/diy/jsp/bq/nav.jsp?isSearch=...&fh_secondid=9956448

Thanks

Please Log in to join the conversation.

More
21 Feb 2010 11:34 - 21 Feb 2010 11:36 #2 by JohnH (John)
Damien,
The 320W one would be OK, but the output in gallons per (I assume) hour might make it a bit hard to control if you didn't have a remote switch in the circuit.
The 250W dirty water pump would be better, in my opinion, apart from the possible hassle the float switch might cause in so confined an area as a wheelie bin.

The power consumption on both is alarming, but there again neither would be used for a long period at any one time of being on. You might want to consider the actual water supply flow from these pumps as if you got distracted you could easily end up overfilling your tank.

Personally I use an Eheim circulation pump which pumps water up to the highest bank of tanks with no bother - without removing it from the 'water butt' I'm using at the moment (dustbin) I couldn't tell you the actual number, but from memory it's a 1260 model. These are somewhat dearer to buy but I can honestly say it has caused me no problems in the two years it has been running and being used daily.

I use a remote switch on the electricity supply to the pump (idea pinched from DO) and this is a great boon, got the set in Lidl a while back, but they seem to reappear from time to time.

I hope this helps a bit.

John

Location:
N. Tipp

We're just two lost souls swimming in a fish bowl - year after year.


ITFS member.



It's a long way to Tipperary.
Last edit: 21 Feb 2010 11:36 by JohnH (John). Reason: spelling

Please Log in to join the conversation.

More
21 Feb 2010 11:38 #3 by Ma (mm mm)
(if yoi will just be putting clean water through it, either is fine, if also used for draining, the butt looks better maint wise asthe other may get clogged and is harder to clean.

Mark

Location D.11

Please Log in to join the conversation.

More
21 Feb 2010 12:34 #4 by KenS (Ken Simpson)
I would say that both of those are too powerful for topping up an aquarium. I got something similar to the one on the left from Lidl about a year ago and it was too much in terms of power. Even in my 575l tank, it managed to send the substrate everywhere.

I eventually settled on a Hozelock pond pump. A bit more expensive, but just right for the job.

Regards,

Ken.

Please Log in to join the conversation.

  • stretnik (stretnik)
  • stretnik (stretnik)'s Avatar
  • Visitor
  • Visitor
21 Feb 2010 13:37 #5 by stretnik (stretnik)
Replied by stretnik (stretnik) on topic Re:pump for water container(wheelie bin)
Surely a good quality powerhead would beat anything.

Kev.

Please Log in to join the conversation.

More
21 Feb 2010 15:14 #6 by dubfish (Alan Martin)
Damian,i use the aqua clear(old type)power heads its the 70 or 802,can be bought very cheap on eBay,or i think petstop stock them.Very powerful,and last for years.

Regards Alan..
Attachments:

Please Log in to join the conversation.

More
21 Feb 2010 16:04 #7 by Damian_Ireland (Damian_Ireland)
thanks for the replies. I have a powerhead which i may be able to use. My tank is 6x2x2 with a 4x1x1 sump... so I will be doing a 200L water change. I will test it with the powerhead that I have first and see how I get on.

Please Log in to join the conversation.

Time to create page: 0.049 seconds
Powered by Kunena Forum