×
Retirement and forum shutdown (17 Jan 2022)

Hi,

John Howell who has managed the forum for years is getting on and wishes to retire from the role of managing it.
Over the years, he has managed the forum through good days and bad days and he has always been fair.
He has managed to bring his passion for fish keeping to the forum and keep it going for so long.

I wish to thank John for his hard work in keeping the forum going.

With John wishing to "retire" from the role of managing the forum and the forum receiving very little traffic, I think we must agree that forum has come to a natural conclusion and it's time to put it to rest.

I am proposing that the forum be made read-only from March 2022 onwards and that no new users or content be created. The website is still registered for several more years, so the content will still be accessible but no new topics or replies will be allowed.

If there is interest from the ITFS or other fish keeping clubs, we may redirect traffic to them or to a Facebook group but will not actively manage it.

I'd like to thank everyone over the years who helped with forum, posted a reply, started a new topic, ask a question and helped a newbie in fish keeping. And thank you to the sponsors who helped us along the away. Hopefully it made the hobby stronger.

I'd especially like to thank John Howell and Valerie Rousseau for all of their contributions, without them the forum would have never been has successful.

Thank you
Darragh Sherwin

fixing bogwod/driftwood

More
22 Feb 2010 17:31 #1 by mickeywallace (Michael Wallace Cath Woods)
In the past i used sealant to stick small pieces of bowood to make larger displays but i find that after a time they come apart or brake loose what other fixing could i use? nails? screws?

i don't want to us copper because at some stage might get inverts so what can be used no plants planned either
Mickey

Mickey Wallace & Cath Woods

Please Log in to join the conversation.

More
22 Feb 2010 17:34 #2 by JohnH (John)
Mickey,
You should be able to get Stainless Steel self-tapping screws. I think, but cannot be sure, that I saw them in B$Q.
John

Location:
N. Tipp

We're just two lost souls swimming in a fish bowl - year after year.


ITFS member.



It's a long way to Tipperary.

Please Log in to join the conversation.

  • stretnik (stretnik)
  • stretnik (stretnik)'s Avatar
  • Visitor
  • Visitor
22 Feb 2010 17:38 #3 by stretnik (stretnik)
Replied by stretnik (stretnik) on topic Re:fixing bogwod/driftwood
Would cable ties work?



Kev.

Please Log in to join the conversation.

More
22 Feb 2010 17:41 #4 by mickeywallace (Michael Wallace Cath Woods)
cheers John
You are a star!!!!!!!!!!!!!!!!
Mickey

Mickey Wallace & Cath Woods

Please Log in to join the conversation.

More
22 Feb 2010 23:10 #5 by platty252 (Darren Dalton)
Both cable ties and stainless steel screws will work.
If you use screws drill a pilot hole first or you will have trouble entering the screw and possibly split the wood.
You could also use tread or fishing line to tie them together.

Please Log in to join the conversation.

More
23 Feb 2010 00:47 #6 by mickeywallace (Michael Wallace Cath Woods)
cheers lads
never consider cable ties?! tread?! or fishing line?! do in this case stainless is the way to go there will be two common plecs and a golden in with them they are quite happy together but can move stuff ( there just mad)

thanks again
mickey

Mickey Wallace & Cath Woods

Please Log in to join the conversation.

More
23 Feb 2010 01:03 #7 by JohnH (John)
I have tried cable ties in a different context in tanks but I found that after a few months the plastic went brittle and eventually snapped. OK, for the purpose I was using them they were easily replaced, but perhaps removing all the woodwork to renew the ties mightn't be quite so easy?

John

Location:
N. Tipp

We're just two lost souls swimming in a fish bowl - year after year.


ITFS member.



It's a long way to Tipperary.

Please Log in to join the conversation.

More
23 Feb 2010 02:21 #8 by sheag35 (Seamus Gillespie)
ok heres an alternative push stainless nails through some suction cups then drill them into the wood, then the wood can be stuck anywhere in the tank, on the bottom or side or back panels

Fishkeeping the Only way to get wet and wild

currently 25 tanks, and breeding is the aim of everything i keep
location:Limerick

Please Log in to join the conversation.

More
23 Feb 2010 12:11 #9 by gerryberry (Jeff Daly)
I have done what Sheag said in his last post, used stainless steel screws with suction cups attached and stuck the bog wood to the glass of the tank. looks really well when in place as you can build up a structure as high as you want to nad gives a great effect.

Jeff

Please Log in to join the conversation.

More
23 Feb 2010 12:16 #10 by JohnH (John)
When I tried this the weight of the bogwood pulled the suckers off the back and side glass!
- Obviously used sub-standard suckers!
Some are a lot better than others...

John

Location:
N. Tipp

We're just two lost souls swimming in a fish bowl - year after year.


ITFS member.



It's a long way to Tipperary.

Please Log in to join the conversation.

More
23 Feb 2010 12:24 #11 by gerryberry (Jeff Daly)
When i done it john i sort of stacked the bogwood on top of one another, Put large pieces on the bottom and then using the suction cups placed smaller pieces on top using the larger bottom pieces for a little support and just in case the suction cup failed the wood wouldn,t have far to fall or wouldn,t hurt any fish.

Some smaller pieces i stuck high up on the glass with the cup as the only support and no issue with them falling off

i might have a pic of it, i will see if i can find it as a pic is worth a thousand waffle words out of me trying to explain it:laugh: :laugh:

Jeff

Please Log in to join the conversation.

More
23 Feb 2010 12:32 #12 by mickeywallace (Michael Wallace Cath Woods)
very interesting some brill ideas
cheers

Mickey Wallace & Cath Woods

Please Log in to join the conversation.

Time to create page: 0.054 seconds
Powered by Kunena Forum