Retirement and forum shutdown (17 Jan 2022)
Hi,
John Howell who has managed the forum for years is getting on and wishes to retire from the role of managing it.
Over the years, he has managed the forum through good days and bad days and he has always been fair.
He has managed to bring his passion for fish keeping to the forum and keep it going for so long.
I wish to thank John for his hard work in keeping the forum going.
With John wishing to "retire" from the role of managing the forum and the forum receiving very little traffic, I think we must agree that forum has come to a natural conclusion and it's time to put it to rest.
I am proposing that the forum be made read-only from March 2022 onwards and that no new users or content be created. The website is still registered for several more years, so the content will still be accessible but no new topics or replies will be allowed.
If there is interest from the ITFS or other fish keeping clubs, we may redirect traffic to them or to a Facebook group but will not actively manage it.
I'd like to thank everyone over the years who helped with forum, posted a reply, started a new topic, ask a question and helped a newbie in fish keeping. And thank you to the sponsors who helped us along the away. Hopefully it made the hobby stronger.
I'd especially like to thank John Howell and Valerie Rousseau for all of their contributions, without them the forum would have never been has successful.
Thank you
Darragh Sherwin
Repairing / Re-sealing a tank
- fishjam45 (Colin Bolton)
-
Topic Author
- Offline
- Junior Member
-
- Posts: 46
- Thank you received: 3
Customer of mine is giving me 2 tanks, the first of which I took today to repair it.
I started filling it up outside to locate the leak and came across it pretty easily.
I took the tank out of the plastic frame that it sat into - see pic below
As the tank filled with water, the pressure increased on the joints and hey presto heres what happened
So i siphoned off the water while holding the glass corner together to stop the leak stretching all the way along the side of the tank.
So heres my question - Is it going to be easy to repair or should i just dump it?
I have a tube of Clear Tec-7 ready to rock but has anyone got any advice/hints/tips or tricks before I do it?
I wanna be able to sleep at night knowing the tanks not gonna split on me ????
Please Log in to join the conversation.
- fishjam45 (Colin Bolton)
-
Topic Author
- Offline
- Junior Member
-
- Posts: 46
- Thank you received: 3
Please Log in to join the conversation.
- fishjam45 (Colin Bolton)
-
Topic Author
- Offline
- Junior Member
-
- Posts: 46
- Thank you received: 3
Please Log in to join the conversation.
- fishjam45 (Colin Bolton)
-
Topic Author
- Offline
- Junior Member
-
- Posts: 46
- Thank you received: 3
Please Log in to join the conversation.
- fishjam45 (Colin Bolton)
-
Topic Author
- Offline
- Junior Member
-
- Posts: 46
- Thank you received: 3
Please Log in to join the conversation.
- fishjam45 (Colin Bolton)
-
Topic Author
- Offline
- Junior Member
-
- Posts: 46
- Thank you received: 3
Please Log in to join the conversation.
- chambers (Ken Spengler)
- Offline
- Junior Member
-
- Posts: 15
- Thank you received: 3
I would rather suggest in getting a tube of aquarium safe silicone rather than tec 7. Seahorse sells it for around 20 euro per tube. I've used silicone and tec 7 and the silicone certainly gives a better bond to glass which is under constant pressure.
Your tank should be easy enough to fix, but preparation is the key. Clean all joints of old silicone with a sharp blade, and make sure all residue is gone before applying new silicone. Should be a breeze. Use masking tape to tape your joints as silicone tends to get everywhere.
Hope that helps somewhat.
Please Log in to join the conversation.
- jeff (Jeff Scully)
-
- Offline
- Platinum Member
-
- Posts: 1461
- Thank you received: 204
start the reseal from the inside pushing it tight to the corner that it comes out threw the outside dont worry how it look outside when it drys it can be made smooth and straight with a new stanley blade
dont worry about the inside till the silicone between the glass is hard id wait till the next day and it will be sealed (but not very strong)
then get a nice tidy line on the inside
to be a 100% sure i would `and did when i did mine' add a glass brace 3" wide and around 5mm thick in the middle of tank, most glazers would not charge you for a piece like this as they bin bigger bits in waste just tell them youll pass on their generosity and to consider them when looking for glass blah blah ye know urself
here is my attempt to show you in a pic
Where the tongue slips, it speaks the truth.
A life making mistakes is not only more honourable, but more useful than a life spent doing nothing at all.
Please Log in to join the conversation.
- jeff (Jeff Scully)
-
- Offline
- Platinum Member
-
- Posts: 1461
- Thank you received: 204
Where the tongue slips, it speaks the truth.
A life making mistakes is not only more honourable, but more useful than a life spent doing nothing at all.
Please Log in to join the conversation.
- maggy88 (Wayne Mc Glynn)
-
- Offline
- Junior Member
-
- Posts: 220
- Thank you received: 39
p.s i used aquarium silicone myself.
just my thoughts on it mate.
Wayne
Please Log in to join the conversation.