×
Retirement and forum shutdown (17 Jan 2022)

Hi,

John Howell who has managed the forum for years is getting on and wishes to retire from the role of managing it.
Over the years, he has managed the forum through good days and bad days and he has always been fair.
He has managed to bring his passion for fish keeping to the forum and keep it going for so long.

I wish to thank John for his hard work in keeping the forum going.

With John wishing to "retire" from the role of managing the forum and the forum receiving very little traffic, I think we must agree that forum has come to a natural conclusion and it's time to put it to rest.

I am proposing that the forum be made read-only from March 2022 onwards and that no new users or content be created. The website is still registered for several more years, so the content will still be accessible but no new topics or replies will be allowed.

If there is interest from the ITFS or other fish keeping clubs, we may redirect traffic to them or to a Facebook group but will not actively manage it.

I'd like to thank everyone over the years who helped with forum, posted a reply, started a new topic, ask a question and helped a newbie in fish keeping. And thank you to the sponsors who helped us along the away. Hopefully it made the hobby stronger.

I'd especially like to thank John Howell and Valerie Rousseau for all of their contributions, without them the forum would have never been has successful.

Thank you
Darragh Sherwin

fx5 external filter

More
26 Sep 2011 00:55 #1 by mbu puffer (alan)
hi i have a fx5 filter and the screws that hold the lid tight have rung on the cannister part causing the lid not to tighten properly ive tried teck7 and other such stuff anyone any ideas to secure the bolts ? and also where is the best place to get the hosing for this filter the one original one is not long enough have tried lots of hardware shops thanks

Please Log in to join the conversation.

More
26 Sep 2011 07:22 #2 by mossy (gavin blanchfield)
get 6 hand clamps from lidl and clamp the lid down tight
you will get the hosing on ebay its sold by the meter which will be cut in one lenght to what you need

Please Log in to join the conversation.

More
26 Sep 2011 10:46 #3 by ceech (Desmond Gaynor)
I would advise you to just replace the clips i have done this before i found mine on ebay.Also got the hose on ebay mine was 4 meters long.
www.ebay.co.uk/itm/FLUVAL-FX5-EXTERNAL-F...f693c9#ht_1610wt_996
www.ebay.co.uk/itm/FLUVAL-FX5-FISH-TANK-...c08eaa#ht_1240wt_906

Please Log in to join the conversation.

More
28 Sep 2011 23:36 #4 by mbu puffer (alan)
thanks for the advice got the clamps working a treat

Please Log in to join the conversation.

Time to create page: 0.046 seconds
Powered by Kunena Forum