-
Forum
-
Equipment
-
Filters, Heaters, Lights
-
Preventing an external filter leaking everywhere
×
Hi,
John Howell who has managed the forum for years is getting on and wishes to retire from the role of managing it.
Over the years, he has managed the forum through good days and bad days and he has always been fair.
He has managed to bring his passion for fish keeping to the forum and keep it going for so long.
I wish to thank John for his hard work in keeping the forum going.
With John wishing to "retire" from the role of managing the forum and the forum receiving very little traffic, I think we must agree that forum has come to a natural conclusion and it's time to put it to rest.
I am proposing that the forum be made read-only from March 2022 onwards and that no new users or content be created. The website is still registered for several more years, so the content will still be accessible but no new topics or replies will be allowed.
If there is interest from the ITFS or other fish keeping clubs, we may redirect traffic to them or to a Facebook group but will not actively manage it.
I'd like to thank everyone over the years who helped with forum, posted a reply, started a new topic, ask a question and helped a newbie in fish keeping. And thank you to the sponsors who helped us along the away. Hopefully it made the hobby stronger.
I'd especially like to thank John Howell and Valerie Rousseau for all of their contributions, without them the forum would have never been has successful.
Thank you
Darragh Sherwin
Preventing an external filter leaking everywhere
Less
More
-
Posts: 667
-
Thank you received: 148
-
-
16 Dec 2012 18:20 #1
by Gonefishy (Brian oneill)
Hi there,
Read a tip thread a few months back and someone talked about drilling two small holes below the water level on the inflow I think (water being pulled into filter) such that if the filter itself started to leak, this would minimize the extent and volume of water spilled all over the place? Think it was something to do with water being only able to drop an inch or so (depending on how much below the water line the hole is made on inflow) before air being pulled into filter. Is this the correct method of insurance so to speak? Seems a no brainer but before I go drilling anything I want to be sure I'm doing the right thing...help appreciated.
Btw, the thread I'm referring to was great as it allowed fr so many people to share the tis and tricks of the hobby that they have picked up....
Thanks!!
Please Log in to join the conversation.
Less
More
-
Posts: 3366
-
Thank you received: 536
-
-
16 Dec 2012 18:25 #2
by igmillichip (ian millichip)
That's the basic gist.
It may mean that the filter will be damaged, but that is much better than a drained tank, dead fish, and possibly preventing the shattering of a heater (and taking the back of the tank with it). Not to mention saving the carpet.
ian
Irish Tropical Fish Society (ITFS) Member.
Please Log in to join the conversation.
Less
More
-
Posts: 667
-
Thank you received: 148
-
-
16 Dec 2012 18:50 #3
by Gonefishy (Brian oneill)
Thx Ian. So basically, I drill a small hole about an inch? Below the water surface on the inflow pipe? Is this an ok distance r should it be greater? Thx!
Please Log in to join the conversation.
Less
More
-
Posts: 922
-
Thank you received: 163
-
-
-
16 Dec 2012 19:01 #4
by davey_c (dave clarke)
seen it done before on other forums alright but what sorta contradicts it for me is when you do water changes the water level drops by over an inch or so so would air not leak into the system regardless of whether the filter is turned off for the change??
fair enough it will prevent many things but to me the holes would need to be below the level at which water will be removed to for a water change meaning that if you do a consistent 10% w/c then that 10% will also be at risk of leaking from a leaky external so won't prevent a substantial amount of damage being done depending on the tank size.
maybe i'm wrong but i don't see it as being 100% fool proof and would be interested in hearing from those who might know more... curiosity more than anything else.
Please Log in to join the conversation.
Less
More
-
Posts: 3366
-
Thank you received: 536
-
-
16 Dec 2012 20:31 #5
by igmillichip (ian millichip)
A better method would be to have a float-switch to work on the water-level.
Getting one or building one that is suitable is a different matter though.
Using the passive tube-bleed notion, though, could have an air-line control valve to allow water changes without turning off the filter.
Of course, good checking of seals and joints does go a long way to minimising an external filter leak.
ian
Irish Tropical Fish Society (ITFS) Member.
Please Log in to join the conversation.
Less
More
-
Posts: 8
-
Thank you received: 0
-
-
16 Dec 2012 21:37 #6
by Daz112 (Darrell macdonald)
Hi I am wondering is there any one that could have a look or somewhere that you would recommend for fixing external filters tetratec ex1200 filter.
It seems to be leaking at the top where ,the clips are to lock the top on. Just on one side.
I would be great full for any help or any information you have.
Please Log in to join the conversation.
-
Forum
-
Equipment
-
Filters, Heaters, Lights
-
Preventing an external filter leaking everywhere
Time to create page: 0.049 seconds