×
Retirement and forum shutdown (17 Jan 2022)

Hi,

John Howell who has managed the forum for years is getting on and wishes to retire from the role of managing it.
Over the years, he has managed the forum through good days and bad days and he has always been fair.
He has managed to bring his passion for fish keeping to the forum and keep it going for so long.

I wish to thank John for his hard work in keeping the forum going.

With John wishing to "retire" from the role of managing the forum and the forum receiving very little traffic, I think we must agree that forum has come to a natural conclusion and it's time to put it to rest.

I am proposing that the forum be made read-only from March 2022 onwards and that no new users or content be created. The website is still registered for several more years, so the content will still be accessible but no new topics or replies will be allowed.

If there is interest from the ITFS or other fish keeping clubs, we may redirect traffic to them or to a Facebook group but will not actively manage it.

I'd like to thank everyone over the years who helped with forum, posted a reply, started a new topic, ask a question and helped a newbie in fish keeping. And thank you to the sponsors who helped us along the away. Hopefully it made the hobby stronger.

I'd especially like to thank John Howell and Valerie Rousseau for all of their contributions, without them the forum would have never been has successful.

Thank you
Darragh Sherwin

Pipe adaptor help

More
14 Aug 2013 20:55 #1 by irish-zx10r (James feenan)
Anyone know where I could get two of these 3/4 to 1/2


Or is there any other way I can get my inline heater to fit a 3/4 pipe?

Something fishie going on here

Please Log in to join the conversation.

More
14 Aug 2013 21:37 #2 by CrustyCrab (Peter Biddulph)
Eheim make adapters like that, as do a few pond filter makers. Not sure about the imperial measurements, so be best to check a few UK sites .
Some of the bigger DIY stores should have them, in the gardening section.

Please Log in to join the conversation.

More
14 Aug 2013 22:05 - 14 Aug 2013 22:14 #3 by Darkslice (Stephen Walsh)
i got all my imperal piping from here

www.hendersons.co.uk/pipework2/imperial_pipe_index.html

they dont to a step down for a pipe, but you could do this?

part no: 121553 (1/2" screw on to 3/4" screw onpipe adapter)
www.hendersons.co.uk/pipework2/threaded_bush.html


part no. 330173 (1/2 tube to 1/2 screw on pipe adapter)
part no. 330179 (3/4 tube to 3/4 screw on pipe adapter)
www.hendersons.co.uk/pipework2/Hose_tail_male.html

but im sure you'll find something easier for the job.
Last edit: 14 Aug 2013 22:14 by Darkslice (Stephen Walsh).

Please Log in to join the conversation.

More
15 Aug 2013 07:39 - 15 Aug 2013 07:40 #4 by newbejkjimk (damien kelly)
Any motor parts store will have them james.
Last edit: 15 Aug 2013 07:40 by newbejkjimk (damien kelly).

Please Log in to join the conversation.

More
15 Aug 2013 08:55 #5 by irish-zx10r (James feenan)

Any motor parts store will have them james.


Thanks I will have a look today in the motor factor shop
I have the making of them in work but I am on holidays so I want to keep away case I get caught to do something
With Maintance lol
How u keeping Jim how's all the tanks going.

Something fishie going on here

Please Log in to join the conversation.

More
15 Aug 2013 12:14 #6 by newbejkjimk (damien kelly)
All right James the tanks are ok had a problem during the fine weather and lost a couple of my favourite fish but all is well now that the rain is back :)

Please Log in to join the conversation.

More
16 Aug 2013 06:42 #7 by mars (Gedas)
Replied by mars (Gedas) on topic Pipe adaptor help
I got my fittings here fish.aquaristic.net/PVC-Fittings/
I have hydor 300w on fx5.

Please Log in to join the conversation.

More
16 Aug 2013 07:44 #8 by Darkslice (Stephen Walsh)
they only seem to do metric system pipe work :/ had my hope up there :)

Please Log in to join the conversation.

More
16 Aug 2013 09:40 #9 by CrustyCrab (Peter Biddulph)

Please Log in to join the conversation.

More
16 Aug 2013 10:13 #10 by irish-zx10r (James feenan)
Would it work if I made a few on the leathe in work

Something fishie going on here

Please Log in to join the conversation.

More
16 Aug 2013 12:22 #11 by Hicker12 (Stephen Hickey)
You can buy these on ebay for about 2 euro. I will send you a link.

Stephen.

Please Log in to join the conversation.

More
06 Sep 2013 18:10 #12 by irish-zx10r (James feenan)
If anyone wants these for a inline heater I can make a few.
20mm x 16mm 60mm long 12mm hole
They turned out very good.



Something fishie going on here
Attachments:

Please Log in to join the conversation.

More
06 Sep 2013 18:13 - 06 Sep 2013 19:14 #13 by irish-zx10r (James feenan)
Sorry double post

Something fishie going on here
Last edit: 06 Sep 2013 19:14 by irish-zx10r (James feenan).

Please Log in to join the conversation.

Time to create page: 0.055 seconds
Powered by Kunena Forum