Retirement and forum shutdown (17 Jan 2022)
Hi,
John Howell who has managed the forum for years is getting on and wishes to retire from the role of managing it.
Over the years, he has managed the forum through good days and bad days and he has always been fair.
He has managed to bring his passion for fish keeping to the forum and keep it going for so long.
I wish to thank John for his hard work in keeping the forum going.
With John wishing to "retire" from the role of managing the forum and the forum receiving very little traffic, I think we must agree that forum has come to a natural conclusion and it's time to put it to rest.
I am proposing that the forum be made read-only from March 2022 onwards and that no new users or content be created. The website is still registered for several more years, so the content will still be accessible but no new topics or replies will be allowed.
If there is interest from the ITFS or other fish keeping clubs, we may redirect traffic to them or to a Facebook group but will not actively manage it.
I'd like to thank everyone over the years who helped with forum, posted a reply, started a new topic, ask a question and helped a newbie in fish keeping. And thank you to the sponsors who helped us along the away. Hopefully it made the hobby stronger.
I'd especially like to thank John Howell and Valerie Rousseau for all of their contributions, without them the forum would have never been has successful.
Thank you
Darragh Sherwin
Do ya think I need a new impeller?
- Q_Comets (Declan Chambers)
- Offline
- Platinum Member
-
- Posts: 1026
- Thank you received: 156
Please Log in to join the conversation.
- CrustyCrab (Peter Biddulph)
-
- Offline
- Elite Member
-
- Posts: 848
- Thank you received: 185
You can also give its housing a wipe. with a small bottle brush, that will bring the flow rates back up.
No harm to clean the hoses/pipework while you are at it.
Please Log in to join the conversation.
- Q_Comets (Declan Chambers)
- Offline
- Platinum Member
-
- Posts: 1026
- Thank you received: 156
Should the white plastic bit be a round hole?
Please Log in to join the conversation.
- CrustyCrab (Peter Biddulph)
-
- Offline
- Elite Member
-
- Posts: 848
- Thank you received: 185
Please Log in to join the conversation.
- Q_Comets (Declan Chambers)
- Offline
- Platinum Member
-
- Posts: 1026
- Thank you received: 156
Please Log in to join the conversation.
- wylam (Stuart Sexton)
-
- Offline
- Premium Member
-
- Posts: 564
- Thank you received: 92
Stuart.
Multi tasking: Screwing up more than one thing at a time.
Please Log in to join the conversation.
- anglecichlid (ciaran hogan)
-
- Offline
- Elite Member
-
- Posts: 902
- Thank you received: 201
I clean these once every two weeks
I had a fluval u3 that used to stick when I turned it
On,
So I had to take it back out give it a nudge to get it going again
Then stick it back in the tank,
Turns out it just needed a good clean,
Also clean the slot it goes in to,
I'm nearly sure the gunk that accumulates in the
Propeller and the slot effects the magnets.
Anyone with a aquarium can keep fish,
But it takes real skill to be a fish keeper,
And it's spongeBob,
SpongeBob lives in a pineapple under the sea
BLANCHARDSTOWN
Please Log in to join the conversation.
- Q_Comets (Declan Chambers)
- Offline
- Platinum Member
-
- Posts: 1026
- Thank you received: 156

Thx for the advice I will give it a clean more regularly now that I have done it once.
Another question should the seals on the taps be given a bit o Vaseline? I did the main seal but didn't do the taps.
Please Log in to join the conversation.
- anglecichlid (ciaran hogan)
-
- Offline
- Elite Member
-
- Posts: 902
- Thank you received: 201
Anyone with a aquarium can keep fish,
But it takes real skill to be a fish keeper,
And it's spongeBob,
SpongeBob lives in a pineapple under the sea
BLANCHARDSTOWN
Please Log in to join the conversation.
- CrustyCrab (Peter Biddulph)
-
- Offline
- Elite Member
-
- Posts: 848
- Thank you received: 185
Please Log in to join the conversation.
- JustinK (Justin Kelly)
- Offline
- Premium Member
-
- Posts: 519
- Thank you received: 70
Vaseline will deteriorate the seals even though it helps with the sealing
initially.
The inner part of the impeller is ceramic and will erode over time.
If your getting loud or unusual noises when in use then there most likely worn.
Always clean and check correct fitting first though.
Please Log in to join the conversation.
- CrustyCrab (Peter Biddulph)
-
- Offline
- Elite Member
-
- Posts: 848
- Thank you received: 185
You should use silicone grease for the seals.
Vaseline will deteriorate the seals even though it helps with the sealing
initially.
The inner part of the impeller is ceramic and will erode over time.
If your getting loud or unusual noises when in use then there most likely worn.
Always clean and check correct fitting first though.
I should have said silicone grease.................
Please Log in to join the conversation.
- Q_Comets (Declan Chambers)
- Offline
- Platinum Member
-
- Posts: 1026
- Thank you received: 156
Where do you get your grease? Any brand I should look for?
Is the silicone grease for the impeller and shaft also?
Please Log in to join the conversation.
- JustinK (Justin Kelly)
- Offline
- Premium Member
-
- Posts: 519
- Thank you received: 70
It seems to be hard to get.
I found alot of parts for different applications recommend it,
But dont supply it with the part for fitting.
I last got it in a place called Heatovent owned by Chadwicks.
Otherwise try online?
Please Log in to join the conversation.
- paulv (paul vickers)
-
- Offline
- Platinum Member
-
- Posts: 1022
- Thank you received: 195
Please Log in to join the conversation.