×
Retirement and forum shutdown (17 Jan 2022)

Hi,

John Howell who has managed the forum for years is getting on and wishes to retire from the role of managing it.
Over the years, he has managed the forum through good days and bad days and he has always been fair.
He has managed to bring his passion for fish keeping to the forum and keep it going for so long.

I wish to thank John for his hard work in keeping the forum going.

With John wishing to "retire" from the role of managing the forum and the forum receiving very little traffic, I think we must agree that forum has come to a natural conclusion and it's time to put it to rest.

I am proposing that the forum be made read-only from March 2022 onwards and that no new users or content be created. The website is still registered for several more years, so the content will still be accessible but no new topics or replies will be allowed.

If there is interest from the ITFS or other fish keeping clubs, we may redirect traffic to them or to a Facebook group but will not actively manage it.

I'd like to thank everyone over the years who helped with forum, posted a reply, started a new topic, ask a question and helped a newbie in fish keeping. And thank you to the sponsors who helped us along the away. Hopefully it made the hobby stronger.

I'd especially like to thank John Howell and Valerie Rousseau for all of their contributions, without them the forum would have never been has successful.

Thank you
Darragh Sherwin

two instead of one

More
27 Apr 2008 16:13 #1 by mickeywallace (Michael Wallace Cath Woods)
i was reading and a tip given was to use two heathers half that rated for your tank thus the two = what your tank required.

the reasons give were
1. if one broke the other would still heat the tank till you could replace it

2. if one is stuck in the \"on\" position the other will cut out thus no boiled fish!

while i can see the sense to this i still wonder is it worth the hassle

is anyone doing this or has it saved anyone tank?

Mickey Wallace & Cath Woods

Please Log in to join the conversation.

More
27 Apr 2008 16:35 #2 by pointer28 (Noel Lambert)
Apart from the obvious cost differential in buying two heaters instead of one, which would be pretty negligible anyway, it seems perfectly logical to me and I'll certainly be keeping that in mind when I get around to setting up a decent sized tank.

Please Log in to join the conversation.

More
27 Apr 2008 17:19 - 27 Apr 2008 17:20 #3 by Acara (Dave Walters)
I can't see the logic behind point 2.If heater A is stuck \"on\",then heater B will cut out.BUT heater A is still stuck \"on\",heater B couldn't possibly turn it off,so I would imagine you will still have 'boiled fish'.
But in a larger tank,then yes,2 heaters would be beneficial.Set 1 heater slightly less than the other,so if the higher 1 dies,the 2nd will kick in.
Considering the cost factor,if you have several hundreds of euro worth of fish in a tank,I would think that 30euro on a 2nd heater is a very cheap insurance policy.
Dave

always on the lookout for interesting corys.pm me if you know off any!
Last edit: 27 Apr 2008 17:20 by Acara (Dave Walters).

Please Log in to join the conversation.

More
27 Apr 2008 21:20 #4 by platty252 (Darren Dalton)
I use 2x50w heaters on my marine tank. The first one is set to the max. No switching on and off causing ware and tear keeping the tank at 25-26c. The second only kicks in when the temp. drops.
My thinking is if i use low wattage heaters they wont boil the fish if they get stuck in the on position. If they both fail the ambeient temp. is around 20 in winter and up to 28 in summer.
It has worked for me so far.

Please Log in to join the conversation.

More
28 Apr 2008 12:19 #5 by goldy (goldy .)
I had trouble with heaters earlier in the year where the jewel one just decided to stop working. It took me a little while to notice as the tank is in the sitting room and room temp was high enough. I noticed the fish acting a bit strange and put in another heater. Amazingly this one broke aswell. Anyway the moral of the story is that I now have 2 heaters in the tank and I dont have any drop in temperature so everyone is happy. Like most things fishy I learnt the hard way.

I can see why people think it is just an added expense but as time goes on and the equipment gets older these kinds of things happen. I supose it is just a fail safe. Its like having 2 filters on the same tank. If one fails the other takes up the slack until you can rectify it.

Please Log in to join the conversation.

Time to create page: 0.052 seconds
Powered by Kunena Forum