×
Retirement and forum shutdown (17 Jan 2022)

Hi,

John Howell who has managed the forum for years is getting on and wishes to retire from the role of managing it.
Over the years, he has managed the forum through good days and bad days and he has always been fair.
He has managed to bring his passion for fish keeping to the forum and keep it going for so long.

I wish to thank John for his hard work in keeping the forum going.

With John wishing to "retire" from the role of managing the forum and the forum receiving very little traffic, I think we must agree that forum has come to a natural conclusion and it's time to put it to rest.

I am proposing that the forum be made read-only from March 2022 onwards and that no new users or content be created. The website is still registered for several more years, so the content will still be accessible but no new topics or replies will be allowed.

If there is interest from the ITFS or other fish keeping clubs, we may redirect traffic to them or to a Facebook group but will not actively manage it.

I'd like to thank everyone over the years who helped with forum, posted a reply, started a new topic, ask a question and helped a newbie in fish keeping. And thank you to the sponsors who helped us along the away. Hopefully it made the hobby stronger.

I'd especially like to thank John Howell and Valerie Rousseau for all of their contributions, without them the forum would have never been has successful.

Thank you
Darragh Sherwin

Fluval Roma Lid Flap HELP NEEDED

More
07 Sep 2011 19:47 #1 by donohoe (Andrew Donohoe)
I have a fluval Roma 125. Today one of the flaps I have cracked. The way the lid works is the light in centre with a flap on either side completing the lid. What can I do,can you buy replacment flaps without the whole light unit cant seem to find any. The tank is only a couple of months old is it possible to replace it if so who and how do I contact.

Please Log in to join the conversation.

  • stretnik (stretnik)
  • stretnik (stretnik)'s Avatar
  • Visitor
  • Visitor
07 Sep 2011 20:07 #2 by stretnik (stretnik)
Replied by stretnik (stretnik) on topic Re: Fluval Roma Lid Flap HELP NEEDED
Can you give me the dimensions of the flap, length and width, not the thickness, I have a similar piece of the material which is very easily cut without rough edges but I need the Dimensions.

Kev.

Please Log in to join the conversation.

More
07 Sep 2011 20:12 #3 by donohoe (Andrew Donohoe)
hey kev thanks but i was hoping on finding a replacement before I resort to making my own if i go that route i will probably get a piece of glass cut or something like that going to try the shop where i bought it if i get the chance tomorrow hopefully the can help me out

Please Log in to join the conversation.

  • stretnik (stretnik)
  • stretnik (stretnik)'s Avatar
  • Visitor
  • Visitor
07 Sep 2011 20:17 #4 by stretnik (stretnik)
Replied by stretnik (stretnik) on topic Re: Fluval Roma Lid Flap HELP NEEDED
Why go down the route of glass? these are simple to make and are identical to the original, I've snapped the little peg things before etc and made new ones, simple but if Glass is more suitable, then way to go.

Kev.

Please Log in to join the conversation.

More
07 Sep 2011 20:28 #5 by donohoe (Andrew Donohoe)
Thanks for the offer. Dont really no why I said glass just something that came to mind as i was typing, there is a glass place that will cut a piece easy if i give them a templateas a possible solution really hoping to see if i can get a replacement if not ill make one shouldnt take too much effort again thanks for the offer appreciate the support. Glad to see im not the only one cracking the panel was very annoyed when it happened :angry: . You ve put me at ease that if i cant get a replacement there are alternatives.

Please Log in to join the conversation.

More
07 Sep 2011 20:37 #6 by sincgar (Feargal Costello)
Hi, Stretnik helped me out before so he is the biz. I've still some of that left over if it of any use. Just give me length and width

Please Log in to join the conversation.

More
07 Sep 2011 20:37 #7 by donohoe (Andrew Donohoe)
now that i think of it i might fancy making my own as i never bothered cutting the old one to fit the hoses for my fluval external. Can you tell me where i can find the plastic sheets and which type would be safe if you can remember.

Please Log in to join the conversation.

  • stretnik (stretnik)
  • stretnik (stretnik)'s Avatar
  • Visitor
  • Visitor
07 Sep 2011 20:40 #8 by stretnik (stretnik)
Replied by stretnik (stretnik) on topic Re: Fluval Roma Lid Flap HELP NEEDED
I might have some, depending on the dimensions....

Kev.

Please Log in to join the conversation.

More
07 Sep 2011 20:44 #9 by donohoe (Andrew Donohoe)
ok cool thanks might get a bit off you depending on how it goes, going to see what i can get first, my dad wants to look around first see what he can do i think he wants to build it he likes a bit of diy. Dont want to seem like im wasting your time giving you one answer then another just trying to see what i can do i guess ill have to wait and see till tomorrow or friday thanks again for your help and offer

Please Log in to join the conversation.

  • stretnik (stretnik)
  • stretnik (stretnik)'s Avatar
  • Visitor
  • Visitor
07 Sep 2011 21:31 #10 by stretnik (stretnik)
Replied by stretnik (stretnik) on topic Re: Fluval Roma Lid Flap HELP NEEDED
No probs.

Kev.

Please Log in to join the conversation.

Time to create page: 0.043 seconds
Powered by Kunena Forum