×
Retirement and forum shutdown (17 Jan 2022)

Hi,

John Howell who has managed the forum for years is getting on and wishes to retire from the role of managing it.
Over the years, he has managed the forum through good days and bad days and he has always been fair.
He has managed to bring his passion for fish keeping to the forum and keep it going for so long.

I wish to thank John for his hard work in keeping the forum going.

With John wishing to "retire" from the role of managing the forum and the forum receiving very little traffic, I think we must agree that forum has come to a natural conclusion and it's time to put it to rest.

I am proposing that the forum be made read-only from March 2022 onwards and that no new users or content be created. The website is still registered for several more years, so the content will still be accessible but no new topics or replies will be allowed.

If there is interest from the ITFS or other fish keeping clubs, we may redirect traffic to them or to a Facebook group but will not actively manage it.

I'd like to thank everyone over the years who helped with forum, posted a reply, started a new topic, ask a question and helped a newbie in fish keeping. And thank you to the sponsors who helped us along the away. Hopefully it made the hobby stronger.

I'd especially like to thank John Howell and Valerie Rousseau for all of their contributions, without them the forum would have never been has successful.

Thank you
Darragh Sherwin

siliconing perspex partitions

More
03 Nov 2014 13:28 #1 by anthonyd (Anthony Debesne)
Hi guys,
Has anyone tried siliconing perspex to glass ?
I dont need it to be super strong but i wouldnt like it to be moving everytime i do something in the tank.

Thanks
Anthony

Please Log in to join the conversation.

More
03 Nov 2014 17:18 #2 by JohnH (John)
Anthony, in my experience silicone will not adhere to perspex but I have 'run' a bead if it on the interior glass - either side of the perspex partitions - which has had the effect of holding the perspex in place - although technically not stuck.

Does anyone have any further suggestions for Anthony?

John

Location:
N. Tipp

We're just two lost souls swimming in a fish bowl - year after year.


ITFS member.



It's a long way to Tipperary.

Please Log in to join the conversation.

More
03 Nov 2014 17:47 #3 by Eric (Eric Corcoran)
Ive a perspex partition in a grow-out tank thats holding well. Just clean the glass really well and the area of the perspex thats going to be glued just give it a rub with sandpaper just to make it rough. I find it holds better that way


Eric

Please Log in to join the conversation.

More
03 Nov 2014 19:16 #4 by anthonyd (Anthony Debesne)
Thanks guys.
I did some test today with some scrap glass and perspex and it seems to hold well enough for what im planning to do.
Will know more 2 morrow when the silicone has cured further.

Anthony

Please Log in to join the conversation.

Time to create page: 0.037 seconds
Powered by Kunena Forum