×
Retirement and forum shutdown (17 Jan 2022)

Hi,

John Howell who has managed the forum for years is getting on and wishes to retire from the role of managing it.
Over the years, he has managed the forum through good days and bad days and he has always been fair.
He has managed to bring his passion for fish keeping to the forum and keep it going for so long.

I wish to thank John for his hard work in keeping the forum going.

With John wishing to "retire" from the role of managing the forum and the forum receiving very little traffic, I think we must agree that forum has come to a natural conclusion and it's time to put it to rest.

I am proposing that the forum be made read-only from March 2022 onwards and that no new users or content be created. The website is still registered for several more years, so the content will still be accessible but no new topics or replies will be allowed.

If there is interest from the ITFS or other fish keeping clubs, we may redirect traffic to them or to a Facebook group but will not actively manage it.

I'd like to thank everyone over the years who helped with forum, posted a reply, started a new topic, ask a question and helped a newbie in fish keeping. And thank you to the sponsors who helped us along the away. Hopefully it made the hobby stronger.

I'd especially like to thank John Howell and Valerie Rousseau for all of their contributions, without them the forum would have never been has successful.

Thank you
Darragh Sherwin

Bulkhead

More
29 Dec 2015 18:59 #1 by Cillian (Cillian Murphy)
So I have a tank I'm building and I got a bulkhead that i was told was for 32mm pic pipes. unfortunately it's 32mm internal diameter, the same a 32mm pvc pipes so they don't actually fit together. Does anyone know where I can get either a slightly larger bulk head or a slightly narrower pvc pipe? I've almost finished the tank just need this bit now so I'd like to get it asap.
Thanks Cillian

Please Log in to join the conversation.

More
29 Dec 2015 19:52 #2 by robert (robert carter)
Replied by robert (robert carter) on topic Bulkhead
have always found the plump centre at the walkinstown roundabout great for pipework and fitting , very helpful lads , all my koi pond pipework came from them

Please Log in to join the conversation.

More
30 Dec 2015 03:24 #3 by paulv (paul vickers)
Replied by paulv (paul vickers) on topic Bulkhead
Seahorse do a big range of pipe work.

Please Log in to join the conversation.

More
30 Dec 2015 11:05 #4 by irish-zx10r (James feenan)
Replied by irish-zx10r (James feenan) on topic Bulkhead
This might sound stupid will your pipe be connected with a jublie clip if so did you try put the pipe in very hot water and soften the end so it will fit over the bulkhead

Something fishie going on here

Please Log in to join the conversation.

More
01 Jan 2016 11:57 #5 by Cillian (Cillian Murphy)
Replied by Cillian (Cillian Murphy) on topic Bulkhead
Thanks for the help guys, the plumbing centre was closed so I went to seahorse and they sorted me out.

Please Log in to join the conversation.

Time to create page: 0.039 seconds
Powered by Kunena Forum