×
Retirement and forum shutdown (17 Jan 2022)

Hi,

John Howell who has managed the forum for years is getting on and wishes to retire from the role of managing it.
Over the years, he has managed the forum through good days and bad days and he has always been fair.
He has managed to bring his passion for fish keeping to the forum and keep it going for so long.

I wish to thank John for his hard work in keeping the forum going.

With John wishing to "retire" from the role of managing the forum and the forum receiving very little traffic, I think we must agree that forum has come to a natural conclusion and it's time to put it to rest.

I am proposing that the forum be made read-only from March 2022 onwards and that no new users or content be created. The website is still registered for several more years, so the content will still be accessible but no new topics or replies will be allowed.

If there is interest from the ITFS or other fish keeping clubs, we may redirect traffic to them or to a Facebook group but will not actively manage it.

I'd like to thank everyone over the years who helped with forum, posted a reply, started a new topic, ask a question and helped a newbie in fish keeping. And thank you to the sponsors who helped us along the away. Hopefully it made the hobby stronger.

I'd especially like to thank John Howell and Valerie Rousseau for all of their contributions, without them the forum would have never been has successful.

Thank you
Darragh Sherwin

120 L tank stand

More
12 Feb 2016 13:04 #1 by irish-zx10r (James feenan)
I am starting a new project and starting from the ground up, all will be done with diy and recycled bits I have the tank on leak test
24x20x16 length,deep,wide would 2x1 be OK double up for the stand or should I go with 3x2 ? Photos to follow

Something fishie going on here

Please Log in to join the conversation.

More
12 Feb 2016 16:25 #2 by robert (robert carter)
personally I would go with 3 x2 , if using softwood , most of the wood that ends up in the diy stores is ungraded so go on the safe side . with 3x2 you are in fact trebling the strength. just my opinion but don't confess to being a structural engineer

Please Log in to join the conversation.

More
12 Feb 2016 18:08 #3 by anthonyd (Anthony Debesne)
3x2 is your best bet.
I m making in the workshop a rack which wil hold 700 litres of water, the legs are 60x40 and the rails 50x30 but i m using hardwood and using tenon and mortice joints ;)

Please Log in to join the conversation.

More
12 Feb 2016 20:38 #4 by irish-zx10r (James feenan)

3x2 is your best bet.
I m making in the workshop a rack which wil hold 700 litres of water, the legs are 60x40 and the rails 50x30 but i m using hardwood and using tenon and mortice joints ;)


I have used 3x2 on some bigger tanks but like you both said it's better to be on the safe side. I use 3x2 for the stand and 2x1 for the hood.

Something fishie going on here

Please Log in to join the conversation.

More
14 Feb 2016 10:47 #5 by paulv (paul vickers)
According to Google your tank full will weigh about 150kg plus any substrate. I'd go with 2x1 and use 12mm ply as the weight bearing cover.Bring the ply all the way to the ground.

Please Log in to join the conversation.

More
14 Feb 2016 11:37 #6 by irish-zx10r (James feenan)

According to Google your tank full will weigh about 150kg plus any substrate. I'd go with 2x1 and use 12mm ply as the weight bearing cover.Bring the ply all the way to the ground.


I double up everything so strength is not a problem it was my mind that's the problem lol 3x2 is very heavy once its doubled up not easy to move either. If the 2x1 does not work I can always use it for the hood.

Something fishie going on here

Please Log in to join the conversation.

Time to create page: 0.041 seconds
Powered by Kunena Forum