×
Retirement and forum shutdown (17 Jan 2022)

Hi,

John Howell who has managed the forum for years is getting on and wishes to retire from the role of managing it.
Over the years, he has managed the forum through good days and bad days and he has always been fair.
He has managed to bring his passion for fish keeping to the forum and keep it going for so long.

I wish to thank John for his hard work in keeping the forum going.

With John wishing to "retire" from the role of managing the forum and the forum receiving very little traffic, I think we must agree that forum has come to a natural conclusion and it's time to put it to rest.

I am proposing that the forum be made read-only from March 2022 onwards and that no new users or content be created. The website is still registered for several more years, so the content will still be accessible but no new topics or replies will be allowed.

If there is interest from the ITFS or other fish keeping clubs, we may redirect traffic to them or to a Facebook group but will not actively manage it.

I'd like to thank everyone over the years who helped with forum, posted a reply, started a new topic, ask a question and helped a newbie in fish keeping. And thank you to the sponsors who helped us along the away. Hopefully it made the hobby stronger.

I'd especially like to thank John Howell and Valerie Rousseau for all of their contributions, without them the forum would have never been has successful.

Thank you
Darragh Sherwin

Differences with supplies, substrates, resins etc

More
31 Jan 2007 05:46 #1 by arabesque (Mick Veale)
A lot of the downside with reading links from cichlid forum
are the regional differences in supplies.

A huge amount of people are using a product called colour quartz
by a company called 3M for their substrate... it's the same texture as sand except uniform and comes in a variety of colours.
I spent a few days trying to track it in ireland. 3M have offices here
but the only way to get it here was to buy a container load from italy!!!!
:shock:

again to post a link to cichlid forum but check out this lovely diy background

www.cichlid-forum.com/articles/diy_aquarium_background3.php

I'd be interested to hear from people who have created diy background and the (locally sourced) materials used in their construction.
I remember trying to source som yacht varnish locally but i had my doubts it it were suitable for aquariums.

Please Log in to join the conversation.

More
31 Jan 2007 06:04 #2 by Sean (Fr. Jack)
Thank-god we live in a free society, just imagine say a religious forum, say the abc muslin forum if some one in that forum linked to the catholic childlid owners forum there would be holy war :idea: On a funny note made be we should be infiltrating the childild form and in hinting about our forum. :lol:

That would be a ecumenical matter!!!

Please Log in to join the conversation.

  • Didihno (Didihno)
  • Didihno (Didihno)'s Avatar
  • Visitor
  • Visitor
31 Jan 2007 06:43 #3 by Didihno (Didihno)
Replied by Didihno (Didihno) on topic Re: Differences with supplies, substrates, resins etc
MALAWI JIHAAAAAAAAD!

Please Log in to join the conversation.

More
31 Jan 2007 06:59 #4 by arabesque (Mick Veale)

MALAWI JIHAAAAAAAAD!


PAH HAH HAH HAH

Please Log in to join the conversation.

  • apistodiscus (apistodiscus)
  • apistodiscus (apistodiscus)'s Avatar
  • Visitor
  • Visitor
31 Jan 2007 07:00 #5 by apistodiscus (apistodiscus)
Replied by apistodiscus (apistodiscus) on topic Re: Differences with supplies, substrates, resins etc
I have a diy background in my 600l tank.
I have poste instructions before but here we go again.

You will need:

styrofaom boards, I used 2 inch thick ones but if that's not thick enough for you, you can glue them together with special styrofoam glue

paintbrush

stanley knfe and soldering iron

silicone

acrylic paint (Easons does the cheapest ones I could find)

waterbased varnish, Ronseal do one suitable of exterior use

Here is how I did it:

silicone the styrofoam boards to the back of your tank anslet dry for 24 hours, Use the stenely knife and soldering iron to cut the shapes into the styrofoam. Paint it to the desired colour(s) and let the paint dry. You will need 2-3 coats. After the last coat of paint has dried apply several coats of varnish. Once the varnish is dry fill the tank and leave it for a day or so. Repeat a couple of times.

Simple but takes abit of time

Please Log in to join the conversation.

More
31 Jan 2007 07:01 #6 by arabesque (Mick Veale)
varnish.. hmmm ... does your background look shiny?

Please Log in to join the conversation.

  • apistodiscus (apistodiscus)
  • apistodiscus (apistodiscus)'s Avatar
  • Visitor
  • Visitor
31 Jan 2007 07:45 #7 by apistodiscus (apistodiscus)
Replied by apistodiscus (apistodiscus) on topic Re: Differences with supplies, substrates, resins etc
nope, it's not a gloss finish but satin

Please Log in to join the conversation.

More
01 Feb 2007 08:07 #8 by arabesque (Mick Veale)
good stuff.. id love to see pics if possible...
go on.. post a how to and the finished result.

Please Log in to join the conversation.

  • apistodiscus (apistodiscus)
  • apistodiscus (apistodiscus)'s Avatar
  • Visitor
  • Visitor
01 Feb 2007 08:24 #9 by apistodiscus (apistodiscus)
Replied by apistodiscus (apistodiscus) on topic Re: Differences with supplies, substrates, resins etc
Don't have broadband at home. I can burn a disc and download it at work tomorrow.

Please Log in to join the conversation.

Time to create page: 0.050 seconds
Powered by Kunena Forum