×
Retirement and forum shutdown (17 Jan 2022)

Hi,

John Howell who has managed the forum for years is getting on and wishes to retire from the role of managing it.
Over the years, he has managed the forum through good days and bad days and he has always been fair.
He has managed to bring his passion for fish keeping to the forum and keep it going for so long.

I wish to thank John for his hard work in keeping the forum going.

With John wishing to "retire" from the role of managing the forum and the forum receiving very little traffic, I think we must agree that forum has come to a natural conclusion and it's time to put it to rest.

I am proposing that the forum be made read-only from March 2022 onwards and that no new users or content be created. The website is still registered for several more years, so the content will still be accessible but no new topics or replies will be allowed.

If there is interest from the ITFS or other fish keeping clubs, we may redirect traffic to them or to a Facebook group but will not actively manage it.

I'd like to thank everyone over the years who helped with forum, posted a reply, started a new topic, ask a question and helped a newbie in fish keeping. And thank you to the sponsors who helped us along the away. Hopefully it made the hobby stronger.

I'd especially like to thank John Howell and Valerie Rousseau for all of their contributions, without them the forum would have never been has successful.

Thank you
Darragh Sherwin

Removing An Internal Filter

More
06 Nov 2009 17:20 #1 by Viperbot (Jason Hughes)
Hi all,
I am thinking about converting my Jewel vision 180 into an mbuna setup. Its currently being used as a community tank. Im aware this tank is probably the minimum for mbuna so Im trying to maximise space by removing the box that houses the filter and using an external to do the filtration. Can this be done? Should I perhaps leave it in and have it working in conjunction with the external? Ill be using ocean rock that takes up a lot of room so Im leaning towards removing it if possible but Id like to hear some opinions too. Cheers.

Location: Finglas, North Dublin.

Life
may not be the party we hoped for, but while we
are here we might as well dance.

Please Log in to join the conversation.

More
06 Nov 2009 17:48 #2 by evanm1978 (Evan Mc Loughlin)
Hi There,
Remove it but be careful as they are well stuck.use a blade or knife down behind it.
Ive done it before on a marine aquarium for the same reason you want to.
more space and looks better.
also i find they tend to hold debris in the very bottom that never circulates and decays raising nitrates.
Just my opinion.
external filter would work far better than an internal also as if you get a good one you can add more media types than just sponges.
also handier for maintainance than having to stick ur hands into tank and filter to change sponges.
I allways find that you leave sponges filtering and cleaning and when u go to lift them out they spill a load of mess back into ur tank
take it out, I think they are cheap rubbish anyway that the companys add to takes to make it look like ur geting value for money

Please Log in to join the conversation.

More
06 Nov 2009 17:53 #3 by Frontosa (Tim kruger)
Hi,
nice to see another one moving the right way;) .I would deffinatly remove the internal and go with an external(Fluval 405 or simalar).I think there is somebody selling them here at the forum for 50 Euros.Regards,Tim

Midlands - in the heart of Ireland.

Keeping and breeding : Frontosa Blue Zaires , Synodontis Petricola , Tropheus Red Rainbow (Kasanga) , Tropheus Moliro . Regulary fry for sale.
Community tank with P.Kribensis and different livebearers.

Please Log in to join the conversation.

More
06 Nov 2009 18:14 #4 by Viperbot (Jason Hughes)
Thanks for the input guys, out it comes. Been dying to move away from internals, they are not great and as evanm1978 said, they foul up the tank doing the slightes bit of maintanence. Who is the guy selling those 405's?? Thats a bargain.

Location: Finglas, North Dublin.

Life
may not be the party we hoped for, but while we
are here we might as well dance.

Please Log in to join the conversation.

More
06 Nov 2009 18:33 #5 by Frontosa (Tim kruger)
Tonycfc.Look in the for sale section.Regards,Tim

Midlands - in the heart of Ireland.

Keeping and breeding : Frontosa Blue Zaires , Synodontis Petricola , Tropheus Red Rainbow (Kasanga) , Tropheus Moliro . Regulary fry for sale.
Community tank with P.Kribensis and different livebearers.

Please Log in to join the conversation.

More
06 Nov 2009 19:43 #6 by Viperbot (Jason Hughes)
Thats great, nice one.

Location: Finglas, North Dublin.

Life
may not be the party we hoped for, but while we
are here we might as well dance.

Please Log in to join the conversation.

More
06 Nov 2009 20:24 #7 by duzzy1 (Martin Kennedy)
just make sure you use a sharp knife with a flexible blade ... they should come out pretty easy , ( it did for me anyway )

i think it was 6 blobs of black silicon holding it in place then its bob's your uncle .

best of luck ....

by the way .. definitely would agree with tim ... the fluval 405 is a brilliant external and for 50 quid its a steal ... a new one cost me 175 recently

Please Log in to join the conversation.

More
07 Nov 2009 10:07 #8 by Viperbot (Jason Hughes)
Thx for the advice, Ill keep you guys updated with the project. Gonna need input on stocking and such so yis will be hearing from me soon. Might even try to keep a phtographic record of the whole thing...not like I have anything better to do :laugh:

Location: Finglas, North Dublin.

Life
may not be the party we hoped for, but while we
are here we might as well dance.

Please Log in to join the conversation.

Time to create page: 0.044 seconds
Powered by Kunena Forum