×
Retirement and forum shutdown (17 Jan 2022)

Hi,

John Howell who has managed the forum for years is getting on and wishes to retire from the role of managing it.
Over the years, he has managed the forum through good days and bad days and he has always been fair.
He has managed to bring his passion for fish keeping to the forum and keep it going for so long.

I wish to thank John for his hard work in keeping the forum going.

With John wishing to "retire" from the role of managing the forum and the forum receiving very little traffic, I think we must agree that forum has come to a natural conclusion and it's time to put it to rest.

I am proposing that the forum be made read-only from March 2022 onwards and that no new users or content be created. The website is still registered for several more years, so the content will still be accessible but no new topics or replies will be allowed.

If there is interest from the ITFS or other fish keeping clubs, we may redirect traffic to them or to a Facebook group but will not actively manage it.

I'd like to thank everyone over the years who helped with forum, posted a reply, started a new topic, ask a question and helped a newbie in fish keeping. And thank you to the sponsors who helped us along the away. Hopefully it made the hobby stronger.

I'd especially like to thank John Howell and Valerie Rousseau for all of their contributions, without them the forum would have never been has successful.

Thank you
Darragh Sherwin

Just how level is level?

More
21 Jun 2010 21:18 #1 by Jim (Jim Lawlor)
I've just setup a new tank (240l)- I got it pretty much bang on level.

But now its settled a bit and its slightly out - maybe 5mm out of 121cm. Its on carpet over wooden floorboards, so its not a complete surprise.

At what point is a tank sufficiently uneven to warrant stripping it down and starting over? I presume there a reasonable amount of tolerance / contingency built into the construction?

Please Log in to join the conversation.

More
22 Jun 2010 19:37 #2 by ted30 (Damo Mac an Bhaird)
well I have a 240liter tank thats the same way for little over 2 years and I've had no problems. Know I'm not saying that its not good or bad just my experience.

Location: Carrickmacross, County Monaghan

Please Log in to join the conversation.

More
22 Jun 2010 19:43 #3 by joey (joe watson)
dont quote me on this, but it shouldn't be a problem SO LONG AS the floor can take the weight (and its not the cause for being un-level) and there is that foam between the tank and stand, it helps to stop the tank slipping off.

although i have similar tilt on mine with no foam and its 450l (i'd guess at 600kg all in) on top of a flimsy stand and not a budge as the weight down is giving enough friction to stop the tank sliding

Location: Portlaoise, Midlands

Please Log in to join the conversation.

More
22 Jun 2010 19:50 #4 by dar (darren curry)
see it is not only a matter of slipping, it's extra pressure on the side panel. mine is the same over two years thou

Check out the angling section, it is fantastic

Please Log in to join the conversation.

More
23 Jun 2010 02:00 #5 by Ma (mm mm)
My planted is off, about 8mm at one end, concrete with wood floor. Extra pressure is negligible from that kind of tilt, more added pressure is created dumping in a bucket of water, and I hope my seals don't hold by that small margin:)


Should be fine as long as the surface it rests on is stable and even.


Mark

Location D.11

Please Log in to join the conversation.

More
24 Jun 2010 22:09 #6 by Jim (Jim Lawlor)
Thanks folks - for the reassurance.

I'll relax about it & get on with the fishkeeping.

Please Log in to join the conversation.

More
26 Jun 2010 00:03 #7 by joey (joe watson)
just dont blame us if it does slip!!!

but that would only be if the floor doesn't hold

so happy i'm ground floor apartment with 2' of concrete under my laminate floor

Location: Portlaoise, Midlands

Please Log in to join the conversation.

More
14 Sep 2010 00:56 #8 by JustinK (Justin Kelly)
I'm in the same predicament.
I've got a 400l with a 5mm difference.
The floor does slope. but whats worse is I went with it doing the tiling.
It was alright with my 150L and self built stand.
Not so sure of this Juwel though.

Please Log in to join the conversation.

More
18 Sep 2010 10:28 #9 by joey (joe watson)
ive just noticed the poxy betta stand is breaking at one side, the side wall is splitting at the bottom and the bottom is bowing in the middle where the sump is. need to reinforce it with thick beams i think. what gets me, is this is how the tank and stand comes form the factory and i few splashes of water (not impossible with a fish tank above) and the thing buckles and splits

Location: Portlaoise, Midlands

Please Log in to join the conversation.

  • john gannon (john gannon)
  • john gannon (john gannon)'s Avatar
  • Visitor
  • Visitor
18 Sep 2010 17:15 #10 by john gannon (john gannon)
Replied by john gannon (john gannon) on topic Re:Just how level is level?
i have the same thing with my betta tank .the cabinet that comes with them is pure crap ive also had to screw the doors on to the frme as there also falling apart
john

Please Log in to join the conversation.

More
19 Sep 2010 00:04 #11 by joey (joe watson)
so do you still have the original cabinet? i was thinking if i (ever) get the funds maybe build a steel framed stand and fix the old panels (or similar) to it. until then i'll keep with my sleepless nights wondering how bad the damage would be if it all goes tits up

Location: Portlaoise, Midlands

Please Log in to join the conversation.

  • john gannon (john gannon)
  • john gannon (john gannon)'s Avatar
  • Visitor
  • Visitor
19 Sep 2010 15:28 #12 by john gannon (john gannon)
Replied by john gannon (john gannon) on topic Re:Just how level is level?
ye still have original cabinet with about 80 kilo of liv e rock in it but its all getting movedc to a clearseal in the next week and the betta will be going onto a timber stand
john

Please Log in to join the conversation.

Time to create page: 0.058 seconds
Powered by Kunena Forum