×
Retirement and forum shutdown (17 Jan 2022)

Hi,

John Howell who has managed the forum for years is getting on and wishes to retire from the role of managing it.
Over the years, he has managed the forum through good days and bad days and he has always been fair.
He has managed to bring his passion for fish keeping to the forum and keep it going for so long.

I wish to thank John for his hard work in keeping the forum going.

With John wishing to "retire" from the role of managing the forum and the forum receiving very little traffic, I think we must agree that forum has come to a natural conclusion and it's time to put it to rest.

I am proposing that the forum be made read-only from March 2022 onwards and that no new users or content be created. The website is still registered for several more years, so the content will still be accessible but no new topics or replies will be allowed.

If there is interest from the ITFS or other fish keeping clubs, we may redirect traffic to them or to a Facebook group but will not actively manage it.

I'd like to thank everyone over the years who helped with forum, posted a reply, started a new topic, ask a question and helped a newbie in fish keeping. And thank you to the sponsors who helped us along the away. Hopefully it made the hobby stronger.

I'd especially like to thank John Howell and Valerie Rousseau for all of their contributions, without them the forum would have never been has successful.

Thank you
Darragh Sherwin

Can you treat water after addition to tank safely?

More
16 Sep 2011 21:47 #1 by fergusq (Fergus Q)
Wondering this. Recently got a 450l and the amount of water to be put in by container means it takes frickin ages!!!
Is it at all feasible to fill the tank direct from a hose and just add the treatment chems to where the water is going in to the tank, maybe adding a bit extra for safety?

Its not ideal I bet but has anyone ever done this?

Please Log in to join the conversation.

More
16 Sep 2011 22:01 #2 by arkeye72 (chris o reilly)
well when i first set my 200 litre up i filled it whit a hose and set up from there add chem never had any probs :)

Please Log in to join the conversation.

  • stretnik (stretnik)
  • stretnik (stretnik)'s Avatar
  • Visitor
  • Visitor
16 Sep 2011 22:01 - 16 Sep 2011 22:06 #3 by stretnik (stretnik)
Replied by stretnik (stretnik) on topic Re: Can you treat water after addition to tank safely?
Absolutely possible, only problem is disturbing the Substrate, a way to avoid this is to put a jug into a low ridged bowl, the water will spill out of the Jug into the Bowl, then over the edge without stirring up your substrate, start slowly first then when the Water in the Tank reaches the rim of the Bowl you can increase the flow, it's exactly how I do it. If it's a new Tank, keep checking the seals to make sure there are no leaks.


( I am assuming you don't mean Water changes ) If you DO mean Water changes, ok, you might be lucky but if you have any sensitive Fish/Inverts you could have trouble, NONE OF US know what's been added to the Water at the treatment department!, get a wheelie bin or something like that, hook it up near your Tank, add conditioner etc, then the Water via the Tap and use a power head attached to some tubing to transfer the Water.

Kev.
Last edit: 16 Sep 2011 22:06 by stretnik (stretnik).

Please Log in to join the conversation.

More
16 Sep 2011 22:07 #4 by fergusq (Fergus Q)
Great - thanks. Ive just always done it by treating the water first in containers. Will be a lot quicker to refill by hosing straight in!! I was just wondering whether the treatment takes a little time to remove the chlorine and whether there might be bacteria killed by it in that time that might cause a problem

Brilliant though, that will save me loadsa time!!!! :woohoo:

Please Log in to join the conversation.

More
16 Sep 2011 22:08 #5 by fergusq (Fergus Q)
dammit, yes, sorry, i mean for water changes

Please Log in to join the conversation.

  • stretnik (stretnik)
  • stretnik (stretnik)'s Avatar
  • Visitor
  • Visitor
16 Sep 2011 22:11 #6 by stretnik (stretnik)
Replied by stretnik (stretnik) on topic Re: Can you treat water after addition to tank safely?
Don't risk it mate, seriously, try the Wheelie bin or large container route, it is easier than I described, a second hand Power-head can be had cheaply enough as can a length of hose, it really IS that simple.

Kev.

Please Log in to join the conversation.

  • stretnik (stretnik)
  • stretnik (stretnik)'s Avatar
  • Visitor
  • Visitor
16 Sep 2011 22:14 #7 by stretnik (stretnik)
Replied by stretnik (stretnik) on topic Re: Can you treat water after addition to tank safely?
Just to throw a Spanner into the works, I cannot imagine the LFS adding stuff to their Water before putting it into their Filtration sumps etc. I'd love to know how they do it?

Kev.

Please Log in to join the conversation.

More
16 Sep 2011 22:21 #8 by fergusq (Fergus Q)
Well, thats kinda how Im thinking.

It sounds like something I dont want to do, but when I think logically about what the difference is, its probably just a max of a few mins delay before the water might happen to meet some aquasafe in the tank itself.

Ill have to google where to get 2nd hand power heads and a big container; suppose if its cheap enough Ill do it. Just the other way would be so much eeeaassier :unsure:

Please Log in to join the conversation.

  • stretnik (stretnik)
  • stretnik (stretnik)'s Avatar
  • Visitor
  • Visitor
16 Sep 2011 22:30 #9 by stretnik (stretnik)
Replied by stretnik (stretnik) on topic Re: Can you treat water after addition to tank safely?
I hear ya, it IS a pain doing the Tap-Bucket-Tap crap but believe me , if you lose Fish you'll be really Pi33ed at yourself.

Go to the Wanted section on the Forum and post our needs there, also, large Bins are available from Hardware stores and places like that, I threw a certain someone :blush: a Tenner for a medium sized Grey Wheelie Bin and it's perfect.

Kev.

Please Log in to join the conversation.

Time to create page: 0.051 seconds
Powered by Kunena Forum