-
Forum
-
Tropical Aquariums
-
Water and Health
-
What do you think?
×
Hi,
John Howell who has managed the forum for years is getting on and wishes to retire from the role of managing it.
Over the years, he has managed the forum through good days and bad days and he has always been fair.
He has managed to bring his passion for fish keeping to the forum and keep it going for so long.
I wish to thank John for his hard work in keeping the forum going.
With John wishing to "retire" from the role of managing the forum and the forum receiving very little traffic, I think we must agree that forum has come to a natural conclusion and it's time to put it to rest.
I am proposing that the forum be made read-only from March 2022 onwards and that no new users or content be created. The website is still registered for several more years, so the content will still be accessible but no new topics or replies will be allowed.
If there is interest from the ITFS or other fish keeping clubs, we may redirect traffic to them or to a Facebook group but will not actively manage it.
I'd like to thank everyone over the years who helped with forum, posted a reply, started a new topic, ask a question and helped a newbie in fish keeping. And thank you to the sponsors who helped us along the away. Hopefully it made the hobby stronger.
I'd especially like to thank John Howell and Valerie Rousseau for all of their contributions, without them the forum would have never been has successful.
Thank you
Darragh Sherwin
What do you think?
Less
More
-
Posts: 107
-
Thank you received: 1
-
-
04 Jan 2008 17:27 - 04 Jan 2008 17:28 #1
by neki (neki)
Do you think is ok to use warm water for water changes in the aquarium?
I don't want to use the tap water because it's to cold.
Thanks for any advice:cheer:
Neki
Please Log in to join the conversation.
-
Valerie (Valerie)
-
-
Visitor
-
04 Jan 2008 17:34 - 04 Jan 2008 17:35 #2
by Valerie (Valerie)
Hi Neki,
From what I gather, using water from the hot water tap might not be a good idea it could contain copper and all sorts of stuff which could be poisonous to fish.
I warm up mains tap water by adding some hot water from the kettle. Another solution would be to store the water indoors for 24 hours so that it levels with the ambiant temperature. The difference is then not so significant and it's easier to warm it with boiling water from the kettle.
I hope this helps.
Regards,
Valerie
Last edit: 04 Jan 2008 17:35 by Valerie (Valerie).
Please Log in to join the conversation.
Less
More
-
Posts: 442
-
Thank you received: 0
-
-
04 Jan 2008 18:45 - 04 Jan 2008 18:46 #3
by tanks_alot (Denis Coghlan)
I agree with Valerie but IMO there are exceptions to her statement and it all depends on the type of heating unit you have in your house.
In my house I am lucky enough to have a gas burning water heater. Basically, I get hot water when I need it! This means that the water passes through the heating units quickly and is not left standing while heating in a copper tank like in other conventional electrical based heating systems.
Because of my gas burner I have always used hot water from the tap for water changes and I have never had a problem. However, I have only kept fish that are considered to be hardy.
This brings me to further this subject? What would be the effects of a couple of addition parts per million of copper in water to fish. I know it is a problem for inverts/corals in marine setups but what does it do to fresh water species and is it really that bad?
Lead me not into temptation, For I can find it myself!
Please Log in to join the conversation.
Less
More
-
Posts: 940
-
Thank you received: 10
-
-
04 Jan 2008 21:15 #4
by KenS (Ken Simpson)
There are arguments for and against using the hot tap. I have a copper immersion heater so don't use the hot water. What Denis says above regarding a gas boiler makes sense if the water is coming from the mains. However, if the water to the boiler is stored in a tank, then it may be contaminated with heavy metals.
I used to heat up my water with kettles. This is fine during the summer when the water from the tap is around 15c+, but during winter, it can be as low as 8c. That means a lot of kettles to bring it up to temperature. It could take 7 to 8 kettles of water to bring my 80l container up to temperature during the winter. I also have a 230l container for doing changes on my 470l African tank. I definitely don't want to get into kettles with that one.
What I do now is fill the container the night before the water change. I put a spare 200w heater in the container and within 24 hours it has the temperature spot on. I usually stir the water a couple of times during the day to make sure the heat is distributed evenly.
All I need to do is add dechlorinator and pump into the tank.
Regards,
Ken.
Please Log in to join the conversation.
-
Didihno (Didihno)
-
-
Visitor
-
04 Jan 2008 21:33 #5
by Didihno (Didihno)
How come the phrase 'heavy metals' shows up with underscores in it?
I use boiled water from the kettle and cold tap water.
Usually one boiled kettle per 3/4 full bucket of tap water does the trick.
Each bucket is about 20l i'm guessing, so I usually end up doing several buckets.
Please Log in to join the conversation.
Less
More
-
Posts: 1048
-
Thank you received: 28
-
-
04 Jan 2008 21:58 #6
by Acara (Dave Walters)
I have seen the inside of a hot water cylinder and will not drink any water from the hot tap as a result.I certainly wouldnt add it to a fish tank.
I use 25 and 50w heaters to bring my water containers up to temp,though this may not be practical if you are running 1 or 2 small tanks.
Dave
always on the lookout for interesting corys.pm me if you know off any!
Please Log in to join the conversation.
Less
More
-
Posts: 1420
-
Thank you received: 2
-
-
05 Jan 2008 01:49 #7
by mickeywallace (Michael Wallace Cath Woods)
I would never use water from a hot tank there is a lot debris build up in side so it can have No2 and No3plus it is usually feed from the cold water tank again the same problem. again with regard to the gas burner so long as it is fed from the mains i don't see a problem but only if it is from the mains unless you are willing to check the water at regular intervals
i would rarely heat the water the simple reason i do regular small water changes rather then big water changes 0ne or two buckets over an hour remember in the wild spring thaw will lower temps for a few days thus with some species it helps to lower temp then rising it to trigger them to breed ( remember i am a maverick and not every one will agree)1 or 2 Deg drop not a problem sudden traumatic drop will cause shock and kill
Mickey Wallace & Cath Woods
Please Log in to join the conversation.
Less
More
-
Posts: 131
-
Thank you received: 0
-
-
05 Jan 2008 02:13 #8
by adriano210 (adrian kraszewski)
in hot water is more caco3 what cause rise up of the water hardnes, is better to reheat watet with aquarium heater or just live a water in bucket to get room temp. anyway water to aquarium shuld wait at list 24 hours before mix with tank water,
beacuse
city installations are presured
in water with higher presure then 1 atm is much more melt gasses
they can be dangerous for your fish
Please Log in to join the conversation.
-
Forum
-
Tropical Aquariums
-
Water and Health
-
What do you think?
Time to create page: 0.055 seconds