-
Forum
-
Tropical Aquariums
-
Water and Health
-
Trying to simplify water changes
×
Hi,
John Howell who has managed the forum for years is getting on and wishes to retire from the role of managing it.
Over the years, he has managed the forum through good days and bad days and he has always been fair.
He has managed to bring his passion for fish keeping to the forum and keep it going for so long.
I wish to thank John for his hard work in keeping the forum going.
With John wishing to "retire" from the role of managing the forum and the forum receiving very little traffic, I think we must agree that forum has come to a natural conclusion and it's time to put it to rest.
I am proposing that the forum be made read-only from March 2022 onwards and that no new users or content be created. The website is still registered for several more years, so the content will still be accessible but no new topics or replies will be allowed.
If there is interest from the ITFS or other fish keeping clubs, we may redirect traffic to them or to a Facebook group but will not actively manage it.
I'd like to thank everyone over the years who helped with forum, posted a reply, started a new topic, ask a question and helped a newbie in fish keeping. And thank you to the sponsors who helped us along the away. Hopefully it made the hobby stronger.
I'd especially like to thank John Howell and Valerie Rousseau for all of their contributions, without them the forum would have never been has successful.
Thank you
Darragh Sherwin
Trying to simplify water changes
Less
More
-
Posts: 15
-
Thank you received: 0
-
-
10 Apr 2011 20:28 #1
by John100 (John O Brien)
HI,
I am currently keeping Tropheus fish in my 350 litre tank. I change 140lt of water a week. I am trying to simplify my water changes. I currently pass my tap water through a HMA filter from RO Man and store it i na 140 ltre wheelie bin. I then heat it up to 26 deg C using kettles of boiling water. AS you can imagine this is expensive and time consuming. I was thinking of setting up a typical domestic hot water tank with an emersion and thermostat to ensure I can regulate the temperature. I was wondering is there any issues with storing the water in a copper tank, is there any danger to the fish ?. I would also be interested in hearing if any one has come up with a simpler way of storing, heating water for their water changes ?.
Rgds
Johnob
Please Log in to join the conversation.
Less
More
-
Posts: 3366
-
Thank you received: 536
-
-
10 Apr 2011 20:55 #2
by igmillichip (ian millichip)
Copper is toxic to fish. "New" copper piping and storage is an increased hazard.
Does not the HMA remove heavy metals (hence its name HMA) though.
Maybe a good heater in the wheelie bin would do.....set-up in advance.
I use kettles of hot water for my water changes (I have done away with my storage systems since moving to a smaller place).
ian
Irish Tropical Fish Society (ITFS) Member.
Please Log in to join the conversation.
-
mr.cichlid (mr.cichlid)
-
-
Visitor
-
10 Apr 2011 21:26 #3
by mr.cichlid (mr.cichlid)
ive a 540 litre tank and what i do is prepare my water a week ahead of each water change , its recommended to change 1/10th of water weekly , i use a 50litre bucket that i buy in equestrian shop as i use them for my horses , they are plastic with handles , i fill with water and wrap top with cling film to stop any contaminants , i leave it in my hot press for the week , leaving water standing naturally removes chlorines/chloramines etc , happens in 24/48hrs but obviously better to leave for the week , this also takes the chilled tap coldness out of water and is ok at room temperature for the water change , if desired you can always put a small heater into the water for a few hours before you do the change ... hope this simplifies things for you ........?????
Please Log in to join the conversation.
Less
More
-
Posts: 6067
-
Thank you received: 857
-
-
-
-
10 Apr 2011 21:55 #4
by JohnH (John)
I once had a friend who used a tea-making Urn for warming and storing his water for changes and another who used a stainless steel water 'boiler' set at the lowest level...but he used to mix that with cold water to make the required temperature.
If you leave water standing it is always best to aerate it as it helps dispel many of the unwanted things like Chlorines in a gas form.
Someone better qualified to explain this process...please.
John
Location:
N. Tipp
We're just two lost souls swimming in a fish bowl - year after year.
ITFS member.
It's a long way to Tipperary.
Please Log in to join the conversation.
Less
More
-
Posts: 3366
-
Thank you received: 536
-
-
10 Apr 2011 23:13 #5
by igmillichip (ian millichip)
Yep John, ideally new water should be well aerated before use (as if we all do that all of the time though

).
The aeration will
help stabilise the water and will
help drive out chlorine as a gas, but it doesn't do much for chloramines as they can take weeks or months to remove by simple standing or aeration.
pH swings are well noted in freshly drawn water....standing and aeration will help stabilise that.
ian
Irish Tropical Fish Society (ITFS) Member.
Please Log in to join the conversation.
-
Forum
-
Tropical Aquariums
-
Water and Health
-
Trying to simplify water changes
Time to create page: 0.039 seconds