×
Retirement and forum shutdown (17 Jan 2022)

Hi,

John Howell who has managed the forum for years is getting on and wishes to retire from the role of managing it.
Over the years, he has managed the forum through good days and bad days and he has always been fair.
He has managed to bring his passion for fish keeping to the forum and keep it going for so long.

I wish to thank John for his hard work in keeping the forum going.

With John wishing to "retire" from the role of managing the forum and the forum receiving very little traffic, I think we must agree that forum has come to a natural conclusion and it's time to put it to rest.

I am proposing that the forum be made read-only from March 2022 onwards and that no new users or content be created. The website is still registered for several more years, so the content will still be accessible but no new topics or replies will be allowed.

If there is interest from the ITFS or other fish keeping clubs, we may redirect traffic to them or to a Facebook group but will not actively manage it.

I'd like to thank everyone over the years who helped with forum, posted a reply, started a new topic, ask a question and helped a newbie in fish keeping. And thank you to the sponsors who helped us along the away. Hopefully it made the hobby stronger.

I'd especially like to thank John Howell and Valerie Rousseau for all of their contributions, without them the forum would have never been has successful.

Thank you
Darragh Sherwin

Temperature of water changes

More
26 Feb 2008 17:20 #1 by sceilg (Craig Higgins)
Hi, I am just wondering what temperature should fresh water being added to the tank be. I have been using room temperature and cold water diluted with boiling to get a temparature around 20 or 30.
:P

Please Log in to join the conversation.

More
26 Feb 2008 20:58 #2 by JohnH (John)
That's quite a temperature difference !!!

But so long as you trickle the new water into your tank and do not make too large of a water change at any one time then you should be OK, but obviously the closer you can have your 'change' water temperature to the existing water the better it will be.
Realistically though, if you can get your replacement water to be at the same temperature as the tank water that will always be the best option - unless you're trying to trigger spawning - then that is a very different thing altogether...but we'll save that for a later time...
John

Location:
N. Tipp

We're just two lost souls swimming in a fish bowl - year after year.


ITFS member.



It's a long way to Tipperary.

Please Log in to join the conversation.

More
27 Feb 2008 16:59 #3 by sceilg (Craig Higgins)
And what would be the best way to heat this water for changes?

Please Log in to join the conversation.

More
27 Feb 2008 19:37 #4 by Acara (Dave Walters)
How much water do you need to heat?I use a 25W heater to get mine up to the correct temp.

Dave

always on the lookout for interesting corys.pm me if you know off any!

Please Log in to join the conversation.

More
28 Feb 2008 21:39 #5 by LimerickBandit (Donal Doran)
I use 1 kettle of boiled water to about 10 litres of cold tap water and have a second thermometer to get it to the exact temperature ;)

Please Log in to join the conversation.

More
28 Feb 2008 21:54 #6 by sheag35 (Seamus Gillespie)
i agree that it should be at the same temp as the tank your refilling i use a home brew beer contained (10 gallons) and heat it with a spare heater i have unless i want to stimulate breeding conditions and then i do it 5 - 10 degrees cooler to simulate a rainshower.. usually does the trick

Fishkeeping the Only way to get wet and wild

currently 25 tanks, and breeding is the aim of everything i keep
location:Limerick

Please Log in to join the conversation.

Time to create page: 0.040 seconds
Powered by Kunena Forum