×
Retirement and forum shutdown (17 Jan 2022)

Hi,

John Howell who has managed the forum for years is getting on and wishes to retire from the role of managing it.
Over the years, he has managed the forum through good days and bad days and he has always been fair.
He has managed to bring his passion for fish keeping to the forum and keep it going for so long.

I wish to thank John for his hard work in keeping the forum going.

With John wishing to "retire" from the role of managing the forum and the forum receiving very little traffic, I think we must agree that forum has come to a natural conclusion and it's time to put it to rest.

I am proposing that the forum be made read-only from March 2022 onwards and that no new users or content be created. The website is still registered for several more years, so the content will still be accessible but no new topics or replies will be allowed.

If there is interest from the ITFS or other fish keeping clubs, we may redirect traffic to them or to a Facebook group but will not actively manage it.

I'd like to thank everyone over the years who helped with forum, posted a reply, started a new topic, ask a question and helped a newbie in fish keeping. And thank you to the sponsors who helped us along the away. Hopefully it made the hobby stronger.

I'd especially like to thank John Howell and Valerie Rousseau for all of their contributions, without them the forum would have never been has successful.

Thank you
Darragh Sherwin

my first algae - looks like \"glow\"

More
01 Sep 2008 22:30 #1 by fourmations (NIall SMyth)
hi all

my redmoor roots are glowing
i thought my glasses were dirty... really!

its only on the roots and is like i describe
its a glow or blur completely surrounding the root pieces
but is nowhere else in the tank

is this run of the mill?

not sure if its worth mentioning
but i re-setup my tank on the weekend and just before that
my anubius plants were developing a fine hair type algae

rgds

4

Please Log in to join the conversation.

More
02 Sep 2008 11:08 #2 by mickeywallace (Michael Wallace Cath Woods)
HI fourmations ,

first have you got a photo would be helpful

how many tanks have you?

And what are your water test results.

Do you use plant food?

How often do you do water changes and clean the bottom.

this info would be helpful
Mickey

Mickey Wallace & Cath Woods

Please Log in to join the conversation.

More
02 Sep 2008 11:35 - 02 Sep 2008 11:37 #3 by fourmations (NIall SMyth)
mickeywallace wrote:

HI fourmations ,

Hi Mickey, thanks for the response, q's tackled below..

first have you got a photo would be helpful
- will take one and post it up in an hour

how many tanks have you? 1

And what are your water test results.
Ammonia - 0, Nitrite - 0, Nitrates - 2, ph 7.2

Do you use plant food? - yes, Tetra PlantaMin

How often do you do water changes and clean the bottom.

I totally redesigned the tank on saturday with 100% water change, new sand, new roots, cobbles, the plants were existing and are two weeks old, so no maintenance yet

other info....
I used tetra safestart, put my two tetras back in sat evening
water tested well, got another 7 tetras on sunday afternoon
put in a dose of plantamin on sunday evening also,
this has manifested itself since (24-36hrs) and it is heavier this morning since posting this question last night


this info would be helpful
Mickey


cheers

4
Last edit: 02 Sep 2008 11:37 by fourmations (NIall SMyth).

Please Log in to join the conversation.

More
02 Sep 2008 13:00 #4 by mickeywallace (Michael Wallace Cath Woods)
Hi fourmations
I would suggest a water change of about 20% to start with!

how long are your lights on for?

test for Phosphate!

or read the labels of plantamin

i would also suggest checking your mains/water supply

lighting either reduce the time or split it over two periods also consider any other light source that is hitting the tank eg from a window

Mickey

Mickey Wallace & Cath Woods

Please Log in to join the conversation.

More
02 Sep 2008 13:07 - 02 Sep 2008 13:16 #5 by fourmations (NIall SMyth)
hi mickey (and all)

How do i test for phosphate
is there a kit in the lfs?

lights on for 12hrs, single 15w hagen aquaglow lamp
no other light source apart from room light when im there
(its a utility room that is not used all the time)

heres the snaps - best i could get



thanks

niall
Last edit: 02 Sep 2008 13:16 by fourmations (NIall SMyth).

Please Log in to join the conversation.

More
02 Sep 2008 13:24 - 02 Sep 2008 13:26 #6 by mickeywallace (Michael Wallace Cath Woods)
hi fourmations,

there are test kits ok
I am sorry to say i would remove the root and boil it scrape it down to ensure complete removal there is an old survival saying about roots boil it three times in this case that is what i would do, others might suggest differently

Mickey

Mickey Wallace & Cath Woods
Last edit: 02 Sep 2008 13:26 by mickeywallace (Michael Wallace Cath Woods). Reason: in complete posting

Please Log in to join the conversation.

  • Valerie (Valerie)
  • Valerie (Valerie)'s Avatar
  • Visitor
  • Visitor
02 Sep 2008 14:51 #7 by Valerie (Valerie)
Replied by Valerie (Valerie) on topic Re:my first algae - looks like \"glow\"
www.irishfishkeepers.com/cms/component/o...w/catid,19/id,28346/

Mould on wood added to a tank seems to be common enough. This happened me too : a good brush sorted me out :-)
I read that, apparently, it's not toxic to the fish.

Hope this helps.
Valerie

Please Log in to join the conversation.

More
02 Sep 2008 14:54 #8 by mickeywallace (Michael Wallace Cath Woods)
Hi Fourmations,

I just went to check my suspicion it appears to be one of the beard/bear algaes

i stand by the boiling but will this completely remove the problem i think not as this has had a few days to thrive.

thus i would suggest adding a little co2 (a quick google for this part:laugh: :laugh: :laugh: :laugh: :laugh: )

now remember co2 will effect your Ph slightly!!!!!!!!

I wanted to add co2 for a short time thus i did a diy job so this may help short term but i thing all will agree your plants will love you for it:woohoo: :woohoo: :woohoo: :woohoo: :woohoo: :woohoo: :woohoo: :woohoo:

I got a two liter mineral bottle some air line an air stone and 1 air line connector i drilled the bottle lid placed the connector in the hole and applied some sealant this done i measured out a liter of water and added four tablespoons of sugar which i stirred in and dissolved as much as possible i placed the water in the bottle and added some yeast the bottle with yeast sugar mixture i left on the drainer over night with a balloon on it this was in case it froated over (i did not want to risk this going into my tank)

the next day the balloon had started to inflated this told me the co2 was present i screwed the lid on connected the air line to the lid and stone and place the stone near the filter in take the co2 created its own pressure and escaped in to the tank

do not use a glass bottle if the pipes get blocked it could explode sending flying glass

again i would point out the this
it will effect PH plants will love it.
remember to check daily as any pressure build up could be dangerous.

while this is a basic home brew treat the resulting liquid as toxic and dispose it when expired this is to get co2 and because nothing has been do to ensure safety or quality it could make you very sick


Mickey

Mickey Wallace & Cath Woods

Please Log in to join the conversation.

More
02 Sep 2008 15:39 #9 by fourmations (NIall SMyth)
thanks for the replies all,

thats a real bummer, i boiled it for near two hours
before it went in!

this is surely going to freak out my tetras big time! :(

the roots are a large part of the tank and
are keeping my combomba from sprawling all over the place
there will be sand everywhere too as i bedded the roots in it :(

heres a snap of the tank
www.irishfishkeepers.com/cms/component/o...w/id,38168/catid,27/

BTW the PlantaMin clearly states that it does not promote algae growth

I chose plants that were suitable for low level light, non co2 tanks and was hoping not to have to go down that road

many thanks all

4

Please Log in to join the conversation.

More
02 Sep 2008 23:13 #10 by mickeywallace (Michael Wallace Cath Woods)
Hi Fourmations,
really sorry about this. but for futher reference i would always boil anything for three one hour periods this i time from the moment the water is bubbling hot.

i only suggested co2 because your photo looks like beard algae which is genus Audouinella which likes low co2 levels i would have expected it on the leaf edges also but for every rule there are exceptions

nor am i suggesting this will be used full time. i am only suggesting it be used long enough to ensure that this problem is kill off now completely! followed by good tank maintenance, should stop this from recurring.

But others may have more suggestions

Mickey

Mickey Wallace & Cath Woods

Please Log in to join the conversation.

More
02 Sep 2008 23:35 #11 by fourmations (NIall SMyth)
hi all

i have taken out the roots and scrubbed and boiled them
for three hours and replaced them, the slimy coating
cleaned off quite easily in hot water

so much for me worrying about my silvertips
they found the whole removal and reinstatement of the roots
quite interesting, there was a nice thick combomba there for them
to lay low in, but they were too curious!

hopefully i wont get a replay of the \"fuzz\"

will keep y'all posted

thanks for all the advice

rgds

4

Please Log in to join the conversation.

More
02 Sep 2008 23:56 #12 by adriano210 (adrian kraszewski)
boil this in a water with table salt, for a 10 liter of water about 2 kilo of salt
after that put roots to the water in a bucket and left there for a another week,
the problem is with the roots they are not completly dead
you buy roots for terrarium purposes not for fish tank

Please Log in to join the conversation.

More
02 Sep 2008 23:56 #13 by platty252 (Darren Dalton)
There is a chance this will come back but it is nothing to worry about.As mentioned earlier it wont harm your fish.
I don't know why this appears on some wood but it can raise it's ugly head from time to time.

@ Micky.Although it looks a bit like black beard algae in the picture you will notice it is lighter in colour. Also BBA starts off in clumps. BBA usually grown in a good flow and the amount of Co2 doesn't seem to matter unless you over dose.
To get rid of it you can use liquid carbon (easycarbo) injected directly on to it over a couple of days. I have also heard direct overdosing with stress coat will kill it off.

Please Log in to join the conversation.

Time to create page: 0.054 seconds
Powered by Kunena Forum