×
Retirement and forum shutdown (17 Jan 2022)

Hi,

John Howell who has managed the forum for years is getting on and wishes to retire from the role of managing it.
Over the years, he has managed the forum through good days and bad days and he has always been fair.
He has managed to bring his passion for fish keeping to the forum and keep it going for so long.

I wish to thank John for his hard work in keeping the forum going.

With John wishing to "retire" from the role of managing the forum and the forum receiving very little traffic, I think we must agree that forum has come to a natural conclusion and it's time to put it to rest.

I am proposing that the forum be made read-only from March 2022 onwards and that no new users or content be created. The website is still registered for several more years, so the content will still be accessible but no new topics or replies will be allowed.

If there is interest from the ITFS or other fish keeping clubs, we may redirect traffic to them or to a Facebook group but will not actively manage it.

I'd like to thank everyone over the years who helped with forum, posted a reply, started a new topic, ask a question and helped a newbie in fish keeping. And thank you to the sponsors who helped us along the away. Hopefully it made the hobby stronger.

I'd especially like to thank John Howell and Valerie Rousseau for all of their contributions, without them the forum would have never been has successful.

Thank you
Darragh Sherwin

parameters of the tap water

More
01 May 2012 19:37 #1 by zabol001 (Marcin)
Where can I check the parameters in my tap water?
Operator should provide parameters.
Where can I call to inquire.
I live in Athlone

Please Log in to join the conversation.

More
01 May 2012 20:11 #2 by BillG (Bill Gray)
I think the only way to get the water parameters for your tap water is to test the water yourself.
It depends on what parameters you are looking to measure, if it’s for your aquarium; you are basically looking to get a baseline for your water, so you want to know the ph and water hardness. These parameters are dependent on where the water is sourced and also the reservoir too.
A lot of areas will have some level of nitrates in the water too; these are not a major concern as an established filter will remove this.
Depending on the area your water is sourced from, you may have levels of other dissolved minerals and even metals. Your local water supplier is required to regularly test the supply to ensure that it meets minimum standards fit for human consumption. I don’t know that they would be willing to share their test results with you, they may share the limits they test to but I would think that’s as good as you could expect.
One thing the water is guaranteed to contain (unless its from a well) is chlorine / chloramines, you will need to remove these with a water conditioner. Most aquarium water conditioners will also remove heavy metals from the water too.
The best option could be to use a standard test kit to test your tap water and get a baseline.

An outline of what you are looking to test for and what fish you plan to stock may help to provide a better answer.
Cheers,

Bill.

Please Log in to join the conversation.

More
01 May 2012 20:30 #3 by SouthAfricanInIreland (Ryan Dokter)
^^^^^ what he said^^^^^^^

:P

Please Log in to join the conversation.

More
02 May 2012 16:37 #4 by zabol001 (Marcin)
I have tested for pH, GH, KH PO4 NO3 NO2 Fe
needs to check the Ca and Mg, and they should know how much of this is in the water

Please Log in to join the conversation.

More
02 May 2012 21:00 #5 by BillG (Bill Gray)
Are you testing for a marine tank?
Mg and Ca can vary quite a lot in tap water, depends on seasonal factors such as level of rainfall. If you take a water sample to a good LFS that deals in marine stock, they should be able to help out with these measurements.

Cheers,

Bill.

Please Log in to join the conversation.

More
02 May 2012 21:50 #6 by zabol001 (Marcin)
No, I need to planted aquarium to know how much Mg I have fertilize in to my aquarium

Please Log in to join the conversation.

More
03 May 2012 08:17 #7 by BillG (Bill Gray)
Your best option is to get your own test kits for the Mg and Ca. This will allow you to monitor the levels and replenish as the plants consume them. It sounds like you are going with EI ferts? or are you using standard ferts?

Cheers,

Bill.

Please Log in to join the conversation.

More
03 May 2012 22:41 #8 by zabol001 (Marcin)
Yes that is Estimate Index fertilization.
Only learning but somehow it's starting to look like :)
I use the dry components.

Here you have a link to my topic.
www.irishfishkeepers.com/index.php/fforu...-salts-where-to-buy-
If you are interested I may advise to not make the mistake as I did at first.

Please Log in to join the conversation.

Time to create page: 0.050 seconds
Powered by Kunena Forum